Changeset 567 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm

Timestamp:

May 26, 2014, 1:25:15 PM (11 years ago)

Author:

krille_n_@…

google:author:

krille_n_@hotmail.com

Message:

Changes:

• Renamed MODULE_FEATURE_SETS to MODULE_POWER_MANAGEMENT.
• Renamed MODULE_VERY_LATE_INITIALIZATION to MODULE_VERY_LATE_INIT and removed it from the official builds.
• Removed the code that skips detection of slave drives on XT-CF controllers since slave drives can be used with Lo-tech ISA CompactFlash boards.
• Added autodetection of the SVC ADP50L controller to XTIDECFG.
• The autodetection of XT-CF controllers now requires MODULE_8BIT_IDE_ADVANCED in the loaded BIOS.
• Fixed a bug in XTIDECFG from r502 where the "Base (cmd block) address" menu option would be displayed when a serial device was selected as the IDE controller.
• XTIDECFG would display the "Enable interrupt" menu option for the XTIDE r1 but not for the XTIDE r2. It's now displayed for both controller types.
• Disabled the "Internal Write Cache" menu option in the Master/Slave Drive menus for serial device type drives.
• Optimizations and other fixes.

File:

• trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm (modified) (2 diffs)

trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm

@@ -28 +28 @@
 ;   Returns:
 ;       CF:     Set, indicates that this is a floppy disk
-;               Clear, indicates that this is a hard disk
+;               Clear, indicates that this is a hard disk
 ;   Corrupts registers:
 ;       AX
@@ -49 +49 @@
 %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
     %ifdef MODULE_SERIAL_FLOPPY
-        %if FLGH_DPT_SERIAL_DEVICE != 0x4 || FLGH_DPT_SERIAL_FLOPPY != 0x10 || FLGH_DPT_SERIAL_FLOPPY_TYPE_MASK != 0xe0 || FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION != 5
+        %if FLGH_DPT_SERIAL_DEVICE != 0x4 || FLGH_DPT_SERIAL_FLOPPY != 0x10 || FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION != 5
             %error "The serial server passes FLGH values into SerialDPT_Finalize directly.  If the flag positions are changed, corresponding changes will need to be made in the serial server, and likely a version check put in to deal with servers talking to incompatible clients"
         %endif