Changeset 589 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/StringsCompressed.asm


Ignore:
Timestamp:
May 22, 2016, 12:26:57 PM (9 years ago)
Author:
Krister Nordvall
Message:

Changes:

  • BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
  • Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
  • Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
  • Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
  • Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
  • Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
  • Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
  • XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
  • Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
  • Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
  • Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
  • The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
  • Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
  • SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
  • BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
  • Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
  • A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
  • Other minor optimizations and fixes.
File:
1 edited

Legend:

Unmodified
Added
Removed

  • trunk/XTIDE_Universal_BIOS/Src/StringsCompressed.asm

    r588 r589  
    257257                                      db     20h,  2bh,  0fh          ; compressed
    258258
     259%ifdef MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
    259260g_szDeviceTypeValues_32bit:         ; db    " 32",NULL
    260261                                    ; db     20h,  33h,  32h,  00h    ; uncompressed
    261262                                      db     20h,  2dh,  0ch          ; compressed
    262263
     264%ifdef MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
    263265g_szDeviceTypeValues_8bit:          ; db    "  8",NULL
    264266                                    ; db     20h,  20h,  38h,  00h    ; uncompressed
    … …  
    273275                                      db     5eh,  30h,  00h          ; compressed
    274276
     277%ifdef MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
    275278g_szDeviceTypeValues_XTCFpio8:      ; db    "T8 ",NULL  ; True 8-bit
    276279                                    ; db     54h,  38h,  20h,  00h    ; uncompressed
    … …  
    297300                                      db     53h,  30h,  00h          ; compressed
    298301
     302%ifdef MODULE_SERIAL
    299303g_szDeviceTypeValues_Serial:        ; db    "SER",NULL
    300304                                    ; db     53h,  45h,  52h,  00h    ; uncompressed
    301305                                      db     59h,  4bh,  98h          ; compressed
    302306
    303 
    304 g_szDeviceTypeValues_Displacement equ (g_szDeviceTypeValues_32bit - g_szDeviceTypeValues)
     307%endif ; MODULE_SERIAL
     308%endif ; MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     309%endif ; MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     310%endif ; MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     311
     312g_szDeviceTypeValues_Displacement equ 3     ; 3 compressed, 4 uncompressed
     313;g_szDeviceTypeValues_Displacement equ (g_szDeviceTypeValues_32bit - g_szDeviceTypeValues)
    305314;
    306315; Ensure that device type strings are correctly spaced in memory
    … …  
    310319%error "g_szDeviceTypeValues Displacement Incorrect 1"
    311320%endif
     321
     322%ifdef MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     323
    312324%if g_szDeviceTypeValues_32bit <> g_szDeviceTypeValues_16bit + g_szDeviceTypeValues_Displacement
    313325%error "g_szDeviceTypeValues Displacement Incorrect 2"
    314326%endif
     327
     328%ifdef MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     329
    315330%if g_szDeviceTypeValues_8bit <> g_szDeviceTypeValues_32bit + g_szDeviceTypeValues_Displacement
    316331%error "g_szDeviceTypeValues Displacement Incorrect 3"
    … …  
    322337%error "g_szDeviceTypeValues Displacement Incorrect 5"
    323338%endif
     339
     340%ifdef MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     341
    324342%if g_szDeviceTypeValues_XTCFpio8 <> g_szDeviceTypeValues_XTIDEr2 + g_szDeviceTypeValues_Displacement
    325343%error "g_szDeviceTypeValues Displacement Incorrect 6"
    … …  
    340358%error "g_szDeviceTypeValues Displacement Incorrect 11"
    341359%endif
     360
     361%ifdef MODULE_SERIAL
     362
    342363%if g_szDeviceTypeValues_Serial <> g_szDeviceTypeValues_ADP50L + g_szDeviceTypeValues_Displacement
    343364%error "g_szDeviceTypeValues Displacement Incorrect 12"
    344365%endif
     366
     367%endif ; MODULE_SERIAL
     368%endif ; MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     369%endif ; MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     370%endif ; MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
     371
    345372%endif
    346373
    … …  
    567594
    568595;; translated usage stats
    569 ;; 172:2
    570 ;; 47:2
    571 ;; 171:2
    572 ;; 46:3
    573 ;; 48:2
    574 ;; 181:1
    575 ;; 200:1
    576 ;; 54:2
    577 ;; 45:2
    578 ;; 49:2
    579596;; 34:3
    580597;; 179:8
    581 ;; 56:8
     598;; 46:3
     599;; 44:1
     600;; 200:1
     601;; 48:2
     602;; 175:1
     603;; 171:2
     604;; 51:3
     605;; 50:2
    582606;; 33:1
    583607;; 53:2
     608;; 45:2
     609;; 47:2
     610;; 172:2
     611;; 56:8
    584612;; 32:34
    585 ;; 175:1
    586 ;; 44:1
    587 ;; 50:2
    588 ;; 51:3
     613;; 181:1
     614;; 54:2
     615;; 49:2
    589616;; total translated: 20
    590617
    591618;; format usage stats
    592 ;; z:2
     619;; 5-x:1
     620;; 2-u:1
     621;; s:14
    593622;; nl:12
    594 ;; u:6
    595 ;; 5-x:1
    596 ;; c:13
    597623;; A:4
    598 ;; s:14
    599624;; 5-u:2
    600625;; x:5
    601 ;; 2-u:1
    602626;; 2-I:1
     627;; z:2
     628;; u:6
     629;; c:13
    603630;; total format: 11
    604631
Note: See TracChangeset for help on using the changeset viewer.