Changeset 567 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialCommand.asm

Timestamp:

May 26, 2014, 1:25:15 PM (11 years ago)

Author:

krille_n_@…

google:author:

krille_n_@hotmail.com

Message:

Changes:

• Renamed MODULE_FEATURE_SETS to MODULE_POWER_MANAGEMENT.
• Renamed MODULE_VERY_LATE_INITIALIZATION to MODULE_VERY_LATE_INIT and removed it from the official builds.
• Removed the code that skips detection of slave drives on XT-CF controllers since slave drives can be used with Lo-tech ISA CompactFlash boards.
• Added autodetection of the SVC ADP50L controller to XTIDECFG.
• The autodetection of XT-CF controllers now requires MODULE_8BIT_IDE_ADVANCED in the loaded BIOS.
• Fixed a bug in XTIDECFG from r502 where the "Base (cmd block) address" menu option would be displayed when a serial device was selected as the IDE controller.
• XTIDECFG would display the "Enable interrupt" menu option for the XTIDE r1 but not for the XTIDE r2. It's now displayed for both controller types.
• Disabled the "Internal Write Cache" menu option in the Master/Slave Drive menus for serial device type drives.
• Optimizations and other fixes.

File:

• trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialCommand.asm (modified) (2 diffs)

trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialCommand.asm

@@ -28 +28 @@
 ;   Parameters:
 ;       BH:     Non-zero if 48-bit addressing used
-;               (ignored at present as 48-bit addressing is not supported)
+;               (ignored at present as 48-bit addressing is not supported)
 ;       BL:     IDE Status Register bit to poll after command
-;               (ignored at present, since there is no IDE status register to poll)
+;               (ignored at present, since there is no IDE status register to poll)
 ;       ES:SI:  Ptr to buffer (for data transfer commands)
 ;       DS:DI:  Ptr to DPT (in RAMVARS segment)
@@ -122 +122 @@
 ;          wSerialPortAndBaud Non-Zero:           -> Continue with wSerialPortAndBaud (1)
 ;          wSerialPortAndBaud Zero:
-;              previous serial drive not found:   -> Scan (2)
-;              previous serial drive found:       -> Continue with previous serial drive info (3)
+;              previous serial drive not found:   -> Scan (2)
+;              previous serial drive found:       -> Continue with previous serial drive info (3)
 ;
 ;    Slave:
 ;          wSerialPortAndBaud Non-Zero:
-;              previous serial drive not found:   -> Error - Not Found (4)
+;              previous serial drive not found:   -> Error - Not Found (4)
 ;              previous serial drive found:       -> Continue with wSerialPackedAndBaud (5)
-;          wSerialPortAndBaud Zero:
-;              previous serial drive not found:   -> Error - Not Found (4)
+;          wSerialPortAndBaud Zero:
+;              previous serial drive not found:   -> Error - Not Found (4)
 ;              previous serial drive found:       -> Continue with previous serial drive info (6)
 ;