Changeset 567 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm


Ignore:
Timestamp:
May 26, 2014, 1:25:15 PM (11 years ago)
Author:
krille_n_@…
google:author:
krille_n_@hotmail.com
Message:

Changes:

  • Renamed MODULE_FEATURE_SETS to MODULE_POWER_MANAGEMENT.
  • Renamed MODULE_VERY_LATE_INITIALIZATION to MODULE_VERY_LATE_INIT and removed it from the official builds.
  • Removed the code that skips detection of slave drives on XT-CF controllers since slave drives can be used with Lo-tech ISA CompactFlash boards.
  • Added autodetection of the SVC ADP50L controller to XTIDECFG.
  • The autodetection of XT-CF controllers now requires MODULE_8BIT_IDE_ADVANCED in the loaded BIOS.
  • Fixed a bug in XTIDECFG from r502 where the "Base (cmd block) address" menu option would be displayed when a serial device was selected as the IDE controller.
  • XTIDECFG would display the "Enable interrupt" menu option for the XTIDE r1 but not for the XTIDE r2. It's now displayed for both controller types.
  • Disabled the "Internal Write Cache" menu option in the Master/Slave Drive menus for serial device type drives.
  • Optimizations and other fixes.
File:
1 edited

Legend:

Unmodified
Added
Removed

  • trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm

    r564 r567  
    3434IdeDPT_Finalize:
    3535
    36 %ifdef MODULE_FEATURE_SETS
     36%ifdef MODULE_POWER_MANAGEMENT
    3737;--------------------------------------------------------------------
    3838; .DetectPowerManagementSupport
    … …  
    4343;       Nothing
    4444;   Corrupts registers:
    45 ;       Nothing
     45;       AL
    4646;--------------------------------------------------------------------
    4747.DetectPowerManagementSupport:
    48     test    BYTE [es:si+ATA6.wSetSup82], A6_wSetSup82_POWERMAN
    49     jz      SHORT .NoPowerManagementSupport
    50     or      BYTE [di+DPT.bFlagsHigh], FLGH_DPT_POWER_MANAGEMENT_SUPPORTED
    51 .NoPowerManagementSupport:
    52 %endif ; MODULE_FEATURE_SETS
     48    mov     al, [es:si+ATA6.wSetSup82]
     49    and     al, A6_wSetSup82_POWERMAN   ; A6_wSetSup82_POWERMAN (bit 3) is the same
     50    or      [di+DPT.bFlagsHigh], al     ; bit as FLGH_DPT_POWER_MANAGEMENT_SUPPORTED
     51%endif ; MODULE_POWER_MANAGEMENT
    5352
    5453
Note: See TracChangeset for help on using the changeset viewer.