Ignore:
Timestamp:
May 1, 2011, 10:44:17 AM (14 years ago)
Author:
Tomi Tilli
google:author:
aitotat
Message:

Changes to Configurator v2:

  • Updated for latest XTIDE Universal BIOS.
File:
1 edited

Legend:

Unmodified
Added
Removed

  • trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm

    r144 r153  
    8888g_szDlgCfgFullMode:     db  "Enable full operating mode?",NULL
    8989g_szDlgCfgStealSize:    db  "How many kiB of base memory to steal for XTIDE Universal BIOS variables (1...255)?",NULL
    90 g_szDlgCfgIdeCnt:       db  "How many IDE controllers to manage (1...5)?",NULL
     90g_szDlgCfgIdeCnt:       db  "How many IDE controllers to manage (1...4)?",NULL
    9191
    9292g_szNfoCfgIde:          db  "IDE controller and drive configuration.",NULL
    … …  
    106106g_szItemIdeMaster:      db  "Master Drive",NULL
    107107g_szItemIdeSlave:       db  "Slave Drive",NULL
    108 g_szItemIdeBusType:     db  "Bus type",NULL
     108g_szItemIdeDevice:      db  "Device type",NULL
    109109g_szItemIdeCmdPort:     db  "Base (cmd block) address",NULL
    110110g_szItemIdeCtrlPort:    db  "Control block address",NULL
    … …  
    112112g_szItemIdeIRQ:         db  "IRQ",NULL
    113113
    114 g_szDlgBusType:         db  "Select type of bus where IDE Controller is connected.",NULL
     114g_szDlgDevice:          db  "Select controller type.",NULL
    115115g_szDlgIdeCmdPort:      db  "Enter IDE command block (base port) address.",NULL
    116116g_szDlgIdeCtrlPort:     db  "Enter IDE control block address (usually command block + 200h).",NULL
    … …  
    121121g_szNfoIdeMaster:       db  "Settings for Master Drive.",NULL
    122122g_szNfoIdeSlave:        db  "Settings for Slave Drive.",NULL
    123 g_szNfoIdeBusType:      db  "Select controller bus type.",NULL
     123g_szNfoIdeDevice:       db  "Select controller device type.",NULL
    124124g_szNfoIdeCmdPort:      db  "IDE Controller Command Block (base port) address.",NULL
    125125g_szNfoIdeCtrlPort:     db  "IDE Controller Control Block address. Usually Cmd Block + 200h.",NULL
    … …  
    136136                        db  NULL
    137137
    138 g_szMultichoiceCfgBusType:
     138g_szMultichoiceCfgDevice:
    139139                        db  "8-bit dual port (XTIDE)",LF
     140                        db  "XTIDE mod by Chuck(G)",LF
    140141                        db  "8-bit single port",LF
    141                         db  "16-bit",LF
    142                         db  "32-bit generic",NULL
    143 
    144 g_szValueCfgBusTypeDual8b:      db  "2x8-bit",NULL
    145 g_szValueCfgBusTypeSingle8b:    db  "1x8-bit",NULL
    146 g_szValueCfgBusType16b:         db  "16-bit",NULL
    147 g_szValueCfgBusType32b:         db  "32-bit",NULL
     142                        db  "16-bit standard IDE",LF
     143                        db  "32-bit generic IDE",LF
     144                        db  "Serial port virtual device",NULL
     145
     146g_szValueCfgDeviceDual8b:   db  "XTIDE",NULL
     147g_szValueCfgDeviceMod:      db  "Chuck(G)",NULL
     148g_szValueCfgDeviceSingle8b: db  "8-bit",NULL
     149g_szValueCfgDevice16b:      db  "16-bit",NULL
     150g_szValueCfgDevice32b:      db  "32-bit",NULL
     151g_szValueCfgDeviceSerial:   db  "serial",NULL
    148152
    149153
Note: See TracChangeset for help on using the changeset viewer.