source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm @ 602

Last change on this file since 602 was 602, checked in by krille_n_, 5 years ago

Changes:

  • SerDrive: Fixed a bug that prevented use of 3.5" 720 KB floppy disk images.
  • Also added support for Microsoft DMF (Distribution Media Format) floppy disk images.
  • XTIDECFG / Library: Minor size optimizations. Added a new macro (SKIP1B) as part of that.
  • BIOS: A small size optimization (2 bytes) to MODULE_8BIT_IDE_ADVANCED that is enabled only when USE_NEC_V is defined.
File size: 30.5 KB
Line 
1; Project name  :   XTIDE Universal BIOS Configurator v2
2; Description   :   All strings.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing initialized data
21SECTION .data
22
23; DOS version check
24g_s$NotMinimumDosVersion:           db  LF,"This program requires DOS version 2 or higher.",LF,"$"
25
26; Menu title
27g_szProgramTitle:                   db  "Configuration and Flashing program for XTIDE Universal BIOS v2.0.0.",LF,CR,NULL
28g_szXtideUniversalBiosSignature:    db  FLASH_SIGNATURE,NULL
29g_szBiosIsNotLoaded:                db  "BIOS is not loaded!",NULL
30g_szEEPROM:                         db  "EEPROM",NULL
31g_szSourceAndTypeSeparator:         db  " : ",NULL
32g_szUnidentified:                   db  "Unidentified",NULL
33g_szUnsaved:                        db  " ",SINGLE_LEFT_HORIZONTAL_TO_VERTICAL,"Unsaved",SINGLE_RIGHT_HORIZONTAL_TO_VERTICAL,NULL
34
35; Item formatting
36g_szFormatItemWithoutValue:         db  "%c%s",NULL
37g_szFormatItemNameWithValue:        db  "%25s%-10S",NULL
38
39
40g_szNo:                             db  "No",NULL
41g_szMultichoiceBooleanFlag:         db  "No",LF
42g_szYes:                            db  "Yes",NULL
43
44; General Yes/No response type dialog messages
45g_szDlgExitToDos:       db  "Exit to DOS?",NULL
46g_szDlgSaveChanges:     db  "Do you want to save changes to XTIDE Universal BIOS image file?",NULL
47g_szDlgDriveNotReady:   db  "Drive not ready! Retry?",NULL
48
49; Generic dialog strings
50g_szNotificationDialog: db  "Notification.",NULL
51g_szErrorDialog:        db  "Error!",NULL
52g_szGenericDialogInfo:  db  "Press ENTER or ESC to close dialog.",NULL
53
54; Flashing related strings
55g_szFlashTitle:         db  "Flashing EEPROM, please wait.",NULL
56g_szErrEepromTooSmall:  db  "Image is too large for selected EEPROM type!",NULL
57g_szErrEepromPolling:   db  "Timeout when polling EEPROM.",LF
58                        db  "EEPROM was not flashed properly!",NULL
59g_szErrEepromVerify:    db  "EEPROM did not return the same byte that was written.",LF
60                        db  "EEPROM was not flashed properly!",NULL
61g_szPCFlashSuccessful:  db  "EEPROM was written successfully.",LF
62                        db  "Press any key to reboot.",NULL
63g_szForeignFlash:       db  "EEPROM was written successfully.",NULL
64
65
66; Strings for main menu
67g_szItemMainExitToDOS:  db  "Exit to DOS",NULL
68g_szItemMainLoadFile:   db  "Load BIOS from file",NULL
69g_szItemMainLoadROM:    db  "Load BIOS from EEPROM",NULL
70g_szItemMainLoadStngs:  db  "Load old settings from EEPROM",NULL
71g_szItemMainConfigure:  db  "Configure XTIDE Universal BIOS",NULL
72g_szItemMainFlash:      db  "Flash EEPROM",NULL
73g_szItemMainSave:       db  "Save BIOS back to original file",NULL
74g_szItemMainLicense:    db  "Copyright and License Information",NULL
75g_szItemMainHomePage:   db  "Web Links",NULL
76
77g_szDlgMainLoadROM:     db  "Successfully loaded XTIDE Universal BIOS from EEPROM.",NULL
78g_szDlgMainLoadStngs:   db  "Successfully loaded settings from EEPROM.",NULL
79g_szDlgMainLoadFile:    db  "Successfully loaded file for flashing.",NULL
80g_szDlgMainSaveFile:    db  "Successfully saved XTIDE Universal BIOS to file.",NULL
81g_szDlgMainFileTooBig:  db  "Selected file is too big to be loaded for flashing!",NULL
82g_szDlgMainLoadErr:     db  "Failed to load file!",NULL
83g_szDlgMainSaveErr:     db  "Failed to save file!",NULL
84g_szDlgFileTitle:       db  "Select file to be flashed.",NULL
85g_szDlgFileFilter:      db  "*.*",NULL
86
87g_szNfoMainExitToDOS:   db  "Quits XTIDE Universal BIOS Configurator.",NULL
88g_szNfoMainLoadFile:    db  "Load BIOS file to be configured or flashed.",NULL
89g_szNfoMainLoadROM:     db  "Load BIOS from EEPROM to be reconfigured.",NULL
90g_szNfoMainLoadStngs:   db  "Load old XTIDE Universal BIOS settings from EEPROM.",NULL
91g_szNfoMainConfigure:   db  "Configure XTIDE Universal BIOS settings.",NULL
92g_szNfoMainFlash:       db  "Flash loaded BIOS image to EEPROM.",NULL
93g_szNfoMainSave:        db  "Save BIOS changes back to original file from which it was loaded.",NULL
94g_szNfoMainLicense:     db  "XTIDE Universal BIOS and XTIDECFG Copyright (C) 2009-2010 by Tomi Tilli, 2011-2019 by XTIDE Universal BIOS Team."
95                        db  " Released under GNU GPL v2, with ABSOLUTELY NO WARRANTY. Press ENTER for more details...",NULL
96g_szNfoMainHomePage:    db  "Visit http://xtideuniversalbios.org (home page) and http://vcfed.org/forum (support)",NULL
97
98g_szHelpMainLicense:    db  "XTIDE Universal BIOS and XTIDECFG Configuration program are Copyright 2009-2010 by Tomi Tilli,"
99                        db  " 2011-2019 by XTIDE Universal BIOS Team. Released under GNU GPL v2. This software comes with ABSOLUTELY NO WARRANTY."
100                        db  " This is free software, and you are welcome to redistribute it under certain conditions."
101                        db  " See the LICENSE.TXT file that was included with this distribution,"
102                        db  " visit http://www.gnu.org/licenses/ gpl-2.0.html, or visit http://xtideuniversalbios.org.",NULL
103
104; Strings for XTIDE Universal BIOS configuration menu
105g_szItemCfgBackToMain:  db  "Back to Main Menu",NULL
106g_szItemCfgIde1:        db  "Primary IDE Controller",NULL
107g_szItemCfgIde2:        db  "Secondary IDE Controller",NULL
108g_szItemCfgIde3:        db  "Tertiary IDE Controller",NULL
109g_szItemCfgIde4:        db  "Quaternary IDE Controller",NULL
110g_szItemCfgBootMenu:    db  "Boot settings",NULL
111g_szItemAutoConfigure:  db  "Auto Configure",NULL
112g_szItemCfgFullMode:    db  "Full operating mode",NULL
113g_szItemCfgStealSize:   db  "kiB to steal from RAM",NULL
114g_szItemCfgIdeCnt:      db  "IDE controllers",NULL
115g_szItemCfgIdleTimeout: db  "Power Management",NULL
116
117g_szDlgAutoConfigure:   db  "Found "
118g_bControllersDetected: db  'x'             ; Value stored directly here
119                        db  " controllers.",NULL
120g_szDlgCfgFullMode:     db  "Enable full operating mode?",NULL
121g_szDlgCfgStealSize:    db  "How many kiB of base memory to steal for XTIDE Universal BIOS variables (1...255)?",NULL
122g_szDlgCfgIdeCnt:       db  "How many IDE controllers to manage (1...4)?",NULL
123g_szDlgCfgIdleTimeout:  db  "Select the amount of time before idling drives should enter standby mode.",NULL
124
125g_szNfoCfgIde:          db  "IDE controller and drive configuration.",NULL
126g_szNfoCfgBootMenu:     db  "Boot configuration.",NULL
127g_szNfoAutoConfigure:   db  "Automatically Configure XTIDE Universal BIOS for this system.",NULL
128g_szNfoCfgFullMode:     db  "Full mode supports multiple controllers and has more features.",NULL
129g_szNfoCfgStealSize:    db  "How many kiB's to steal from Conventional memory for XTIDE Universal BIOS variables.",NULL
130g_szNfoCfgIdeCnt:       db  "Number of IDE controllers to manage.",NULL
131g_szNfoCfgIdleTimeout:  db  "Enable Power Management to set the harddrive(s) to spin down after idling a certain amount of time.",NULL
132
133g_szSerialMoved:        db  "A Serial Controller has been moved to the end of the Controller list."
134                        db  " No further action is required. Serial Controllers must be placed at the end of the list.",NULL
135
136g_szHelpCfgFullMode:    db  "Full mode supports up to 4 IDE controllers (8 drives). Full mode reserves a bit of RAM from the top of"
137                        db  " Conventional memory. This makes it possible to use ROM BASIC and other software that requires"
138                        db  " the interrupt vectors where XTIDE Universal BIOS parameters would be stored in Lite mode.",LF,LF
139                        db  "Lite mode supports only 2 IDE controllers (4 drives) and stores parameters to the top of the interrupt vectors"
140                        db  " (30:0h) so no Conventional memory needs to be reserved. Lite mode cannot be used if some software requires"
141                        db  " the top of interrupt vectors. Usually this is not a problem since only IBM ROM BASIC uses them.",LF,LF
142                        db  "Tandy 1000 models with 640 kiB or less memory need to use Lite mode since the top of Conventional memory gets"
143                        db  " dynamically reserved by video hardware. This happens only with Tandy integrated video controller and not when"
144                        db  " using expansion graphics cards. It is possible to use Full mode if reserving RAM for video memory + what is"
145                        db  " required for XTIDE Universal BIOS. This would mean 65 kiB but most software should work with 33 kiB reserved.",NULL
146
147g_szHelpCfgStealSize:   db  "Parameters for detected hard disks must be stored somewhere. In Full mode they are stored at the top of Conventional"
148                        db  " memory. 1 kiB is usually enough but you may have to reserve more if you want to use Full mode on a Tandy 1000.",NULL
149
150g_szHelpCfgIdleTimeout: db  "This option enables the standby timer for all harddrives handled by XTIDE Universal BIOS,"
151                        db  " allowing the drives to spin down after idling the selected amount of time."
152                        db  " Note that this does not work with old drives that lack the Power Management feature set."
153                        db  " Also note that timeouts less than 5 minutes may cause unnecessary wear on the drives and is not recommended"
154                        db  " (use for compatibility testing only).",NULL
155
156g_szMultichoiceIdleTimeout: db  "Disabled",LF
157                            db  "1 m",LF
158                            db  "2 m",LF
159                            db  "3 m",LF
160                            db  "4 m",LF
161                            db  "5 m",LF
162                            db  "6 m",LF
163                            db  "7 m",LF
164                            db  "8 m",LF
165                            db  "9 m",LF
166                            db  "10 m",LF
167                            db  "11 m",LF
168                            db  "12 m",LF
169                            db  "13 m",LF
170                            db  "14 m",LF
171                            db  "15 m",LF
172                            db  "16 m",LF
173                            db  "17 m",LF
174                            db  "18 m",LF
175                            db  "19 m",LF
176                            db  "20 m",LF
177                            db  "30 m",LF
178                            db  "1 h",LF
179                            db  "1 h 30 m",LF
180g_szIdleTimeoutChoice24:    db  "2 h",NULL
181g_szIdleTimeoutChoice23:    db  "1 h 30 m",NULL
182g_szIdleTimeoutChoice22:    db  "1 h",NULL
183g_szIdleTimeoutChoice21:    db  "30 m",NULL
184g_szIdleTimeoutChoice20:    db  "20 m",NULL
185g_szIdleTimeoutChoice19:    db  "19 m",NULL
186g_szIdleTimeoutChoice18:    db  "18 m",NULL
187g_szIdleTimeoutChoice17:    db  "17 m",NULL
188g_szIdleTimeoutChoice16:    db  "16 m",NULL
189g_szIdleTimeoutChoice15:    db  "15 m",NULL
190g_szIdleTimeoutChoice14:    db  "14 m",NULL
191g_szIdleTimeoutChoice13:    db  "13 m",NULL
192g_szIdleTimeoutChoice12:    db  "12 m",NULL
193g_szIdleTimeoutChoice11:    db  "11 m",NULL
194g_szIdleTimeoutChoice10:    db  "10 m",NULL
195g_szIdleTimeoutChoice9:     db  "9 m",NULL
196g_szIdleTimeoutChoice8:     db  "8 m",NULL
197g_szIdleTimeoutChoice7:     db  "7 m",NULL
198g_szIdleTimeoutChoice6:     db  "6 m",NULL
199g_szIdleTimeoutChoice5:     db  "5 m",NULL
200g_szIdleTimeoutChoice4:     db  "4 m",NULL
201g_szIdleTimeoutChoice3:     db  "3 m",NULL
202g_szIdleTimeoutChoice2:     db  "2 m",NULL
203g_szIdleTimeoutChoice1:     db  "1 m",NULL
204g_szIdleTimeoutChoice0:     db  "Disabled",NULL
205
206; Strings for IDE Controller menu
207g_szItemBackToCfgMenu:      db  "Back to Configuration Menu",NULL
208g_szItemIdeMaster:          db  "Master Drive",NULL
209g_szItemIdeSlave:           db  "Slave Drive",NULL
210g_szItemIdeDevice:          db  "Device type",NULL
211g_szItemIdeCmdPort:         db  "Base (cmd block) address",NULL
212g_szItemIdeCtrlPort:        db  "Control block address",NULL
213g_szItemIdeEnIRQ:           db  "Enable interrupt",NULL
214g_szItemIdeIRQ:             db  "IRQ",NULL
215g_szItemSerialCOM:          db  "COM Port",NULL
216g_szItemSerialBaud:         db  "Baud Rate",NULL
217g_szItemSerialPort:         db  "COM Port I/O address",NULL
218g_szItemIdeSerialComPort:   db  "COM port",NULL
219g_szItemIdeSerialBaudRate:  db  "Baud rate",NULL
220
221g_szDlgDevice:              db  "Select controller type.",NULL
222g_szDlgIdeCmdPort:          db  "Enter IDE command block (base port) address.",NULL
223g_szDlgIdeCtrlPort:         db  "Enter IDE control block address (usually command block + 200h).",NULL
224g_szDlgIdeEnIRQ:            db  "Enable interrupt?",NULL
225g_szDlgIdeIRQ:              db  "Enter IRQ channel (2...7 for 8-bit controllers, 2...15 for any other controller).",NULL
226g_szUnsupportedDevice:      db  "There is no support for this device type in the currently loaded BIOS."
227                            db  " You must load a BIOS built with the proper module included to be able to use this type of device.",NULL
228
229g_szNfoIdeBackToCfgMenu:    db  "Back to XTIDE Universal BIOS Configuration Menu.",NULL
230g_szNfoIdeMaster:           db  "Settings for Master Drive.",NULL
231g_szNfoIdeSlave:            db  "Settings for Slave Drive.",NULL
232g_szNfoIdeDevice:           db  "Select controller device type.",NULL
233g_szNfoIdeCmdPort:          db  "IDE Controller Command Block (base port) address or segment address for JR-IDE/ISA and SVC ADP50L.",NULL
234g_szNfoIdeCtrlPort:         db  "IDE Controller Control Block address. Usually Cmd Block + 8 for XTIDE, and Cmd Block + 200h for ATA.",NULL
235g_szNfoIdeEnIRQ:            db  "Interrupt or polling mode.",NULL
236g_szNfoIdeIRQ:              db  "IRQ channel to use.",NULL
237g_szNfoIdeSerialCOM:        db  "Select a COM port by number.",NULL
238g_szNfoIdeSerialBaud:       db  "Select the COM port's Baud Rate. The server must match this speed."
239                            db  " Note that UART clock multipliers may impact the actual speed.",NULL
240g_szNfoIdeSerialPort:       db  "Select a COM port by custom I/O port address. Any address is valid up to 3F8h, but must be on an 8-byte boundary.",NULL
241
242g_szHelpIdeCmdPort:         db  "IDE controller command block address is the usual address mentioned for IDE controllers."
243                            db  " By default the primary IDE controller uses port 1F0h and secondary controller uses port 170h."
244                            db  " XTIDE card uses port 300h by default."
245                            db  " JR-IDE/ISA and SVC ADP50L do not use ports but needs the ROM segment address set here instead.",NULL
246
247g_szHelpIdeCtrlPort:        db  "IDE controller Control Block address is normally Command Block address + 200h."
248                            db  " For XTIDE card the Control Block registers are mapped right after Command Block"
249                            db  " registers so use Command Block address + 8h for XTIDE card.",NULL
250
251g_szHelpIdeEnIRQ:           db  "IDE controller can use interrupts to signal when it is ready to transfer data."
252                            db  " This makes possible to do other tasks while waiting drive to be ready."
253                            db  " That is usually not useful in MS-DOS but using interrupts frees the bus for any DMA transfers."
254                            db  " Polling mode is used when interrupts are disabled."
255                            db  " Polling usually gives a little better access times since interrupt handling requires extra processing."
256                            db  " There can be some compatibility issues with some old drives when polling is used with Block Mode transfers.",NULL
257
258g_szHelpIdeIRQ:             db  "IRQ channel to use. All controllers managed by XTIDE Universal BIOS can use the same IRQ when MS-DOS is used."
259                            db  " Other operating systems are likely to require different interrupts for each controller.",NULL
260
261g_szHelpIdeSerialCOM:       db  "Select a serial port by COM port number. COM1 through COM4 have well established I/O port assignments,"
262                            db  ' COM5 and onward are less well established. "COMA" represents COM10, "COMB" represents COM11, and "COMC"'
263                            db  ' represents COM12. Selecting "COMx" enables the manual selection of an I/O port address.',NULL
264
265g_szHelpIdeSerialPort:      db  "Select a serial port by I/O address. Any port address is supported up to 3F8h, but must be on an 8-byte boundary."
266                            db  " If the entered value corresponds to one of the established COM port numbers, then the selection will snap"
267                            db  ' to that COM port and "COMx" must be selected again for custom I/O address entry.',NULL
268
269g_szHelpIdeSerialBaud:      db  "Supported baud rates are 2400, 4800, 9600, 19.2K, 28.8K, 38.4K, 57.6K, and 115.2K. The server must also be set to"
270                            db  " this same speed. Older UARTs may only support up to 9600 baud, but sometimes can be pushed to 38.4K. 115.2K will"
271                            db  " likely only be possible with a newer UART that includes a FIFO. Some high speed serial ports include UART clock"
272                            db  " multipliers, allowing for speeds at 230.4K (2x multiplier) and 460.8K (4x multiplier) above 115.2K. These high"
273                            db  " speeds are supported by these BIOS, even on original 4.77MHz 8088 systems. Note that UART clock multipliers are"
274                            db  " not detectable by the software and 115.2K will still be used during configuration for high speeds; but if"
275                            db  " a multiplier is used, the actual speed (including the multiplier) will need to be used by the server.",NULL
276
277g_szMultichoiceCfgDevice:   db  "16-bit ISA/VLB/PCI IDE",LF
278                            db  "32-bit VLB/PCI IDE",LF
279                            db  "16-bit ISA IDE in 8-bit mode",LF
280                            db  "XTIDE rev 1",LF
281                            db  "XTIDE rev 2 or modded rev 1",LF
282                            db  "XTIDE rev 2 (Olivetti M24)",LF
283                            db  "XT-CF PIO8",LF
284                            db  "XT-CF PIO8 (BIU offload)",LF
285                            db  "XT-CF PIO16 (BIU offload)",LF
286                            db  "XT-CF DMA (v3 only)",LF
287                            db  "JR-IDE/ISA",LF
288                            db  "SVC ADP50L",LF
289                            db  "Serial port virtual device",NULL
290
291g_szValueCfgDevice16b:                      db  "16-bit",NULL
292g_szValueCfgDevice32b:                      db  "32-bit",NULL
293g_szValueCfgDevice8b:                       db  "8-bit",NULL
294g_szValueCfgDeviceRev1:                     db  "XTIDE r1",NULL
295g_szValueCfgDeviceRev2:
296g_szValueCfgDeviceRev2Olivetti:             db  "XTIDE r2",NULL
297g_szValueCfgDeviceXTCFPio8:                 db  "XTCF PIO",NULL
298g_szValueCfgDeviceXTCFPio8WithBIUOffload:   db  "BIU 8",NULL
299g_szValueCfgDeviceXTCFPio16WithBIUOffload:  db  "BIU 16",NULL
300g_szValueCfgDeviceXTCFDMA:                  db  "XTCF DMA",NULL
301g_szValueCfgDeviceJrIdeIsa:                 db  "JR-ISA",NULL
302g_szValueCfgDeviceADP50L:                   db  "ADP50L",NULL
303g_szValueCfgDeviceSerial:                   db  "Serial",NULL
304
305g_szSerialCOMChoice:    db  "COM1 - address 3F8h",LF
306                        db  "COM2 - address 2F8h",LF
307                        db  "COM3 - address 3E8h",LF
308                        db  "COM4 - address 2E8h",LF
309                        db  "COM5 - address 2F0h",LF
310                        db  "COM6 - address 3E0h",LF
311                        db  "COM7 - address 2E0h",LF
312                        db  "COM8 - address 260h",LF
313                        db  "COM9 - address 368h",LF
314                        db  "COMA - address 268h",LF
315                        db  "COMB - address 360h",LF
316                        db  "COMC - address 270h",LF
317                        db  "COMx - Custom address",NULL
318
319g_szValueCfgCOM1:       db  "COM1",NULL
320g_szValueCfgCOM2:       db  "COM2",NULL
321g_szValueCfgCOM3:       db  "COM3",NULL
322g_szValueCfgCOM4:       db  "COM4",NULL
323g_szValueCfgCOM5:       db  "COM5",NULL
324g_szValueCfgCOM6:       db  "COM6",NULL
325g_szValueCfgCOM7:       db  "COM7",NULL
326g_szValueCfgCOM8:       db  "COM8",NULL
327g_szValueCfgCOM9:       db  "COM9",NULL
328g_szValueCfgCOMA:       db  "COMA",NULL
329g_szValueCfgCOMB:       db  "COMB",NULL
330g_szValueCfgCOMC:       db  "COMC",NULL
331g_szValueCfgCOMx:       db  "Custom",NULL
332
333g_szSerialBaudChoice:   db  "115.2K baud",LF
334                        db  "57.6K baud",LF
335                        db  "38.4K baud",LF
336                        db  "28.8K baud",LF
337                        db  "19.2K baud",LF
338                        db  "9600 baud",LF
339                        db  "4800 baud",LF
340                        db  "2400 baud",NULL
341
342g_szValueCfgBaud115_2:  db  "115.2K",NULL
343g_szValueCfgBaud57_6:   db  "57.6K",NULL
344g_szValueCfgBaud38_4:   db  "38.4K",NULL
345g_szValueCfgBaud28_8:   db  "28.8K",NULL
346g_szValueCfgBaud19_2:   db  "19.2K",NULL
347g_szValueCfgBaud9600:   db  "9600",NULL
348g_szValueCfgBaud4800:   db  "4800",NULL
349g_szValueCfgBaud2400:   db  "2400",NULL
350
351
352; Strings for DRVPARAMS menu
353g_szItemDrvBackToIde:   db  "Back to IDE Controller Menu",NULL
354g_szItemDrvBlockMode:   db  "Block Mode Transfers",NULL
355g_szItemDrvXlateMode:   db  "CHS translation method",NULL
356g_szItemDrvWriteCache:  db  "Internal Write Cache",NULL
357g_szItemDrvUserCHS:     db  "User specified CHS",NULL
358g_szItemDrvCyls:        db  "Cylinders",NULL
359g_szItemDrvHeads:       db  "Heads",NULL
360g_szItemDrvSect:        db  "Sectors per track",NULL
361g_szItemDrvUserLBA:     db  "User specified LBA",NULL
362g_szItemDrvLbaSectors:  db  "Millions of sectors",NULL
363
364g_szDlgDrvBlockMode:    db  "Enable Block Mode Transfers?",NULL
365g_szDlgDrvXlateMode:    db  "Select P-CHS to L-CHS translation method.",NULL
366g_szDlgDrvWriteCache:   db  "Select hard drive internal write cache settings.",NULL
367g_szDlgDrvUserCHS:      db  "Specify (P-)CHS parameters manually?",NULL
368g_szDlgDrvCyls:         db  "Enter number of P-CHS cylinders (1...16383).",NULL
369g_szDlgDrvHeads:        db  "Enter number of P-CHS heads (1...16).",NULL
370g_szDlgDrvSect:         db  "Enter number of sectors per track (1...63).",NULL
371g_szDlgDrvUserLBA:      db  "Limit drive capacity?",NULL
372g_szDlgDrvLbaSectors:   db  "Enter maximum capacity in millions of sectors (16...256).",NULL
373
374g_szNfoDrvBlockMode:    db  "Transfer multiple sectors per data request.",NULL
375g_szNfoDrvXlateMode:    db  "P-CHS to L-CHS translation method.",NULL
376g_szNfoDrvWriteCache:   db  "Hard Drive Internal Write Cache settings (WARNING!).",NULL
377g_szNfoDrvUserCHS:      db  "Specify (P-)CHS parameters manually instead of autodetecting them.",NULL
378g_szNfoDrvCyls:         db  "Number of user specified P-CHS cylinders.",NULL
379g_szNfoDrvHeads:        db  "Number of user specified P-CHS heads.",NULL
380g_szNfoDrvSect:         db  "Number of user specified P-CHS sectors per track.",NULL
381g_szNfoDrvUserLBA:      db  "Limit drive capacity to fix compatibility problems with Windows 9x.",NULL
382g_szNfoDrvLbaSectors:   db  "Millions of sectors (1024*1024). 1M sectors = 512 MiB. Recommended limits are 64 for Windows 95, 128 for Windows 98 and 256 for Windows ME (and 98 with updated fdisk).",NULL
383
384g_szHelpDrvBlockMode:   db  "Block Mode will speed up transfers since multiple sectors can be transferred before waiting next data request."
385                        db  " Normally Block Mode should always be kept enabled but there is at least one"
386                        db  " drive with buggy Block Mode implementation (Quantum ProDrive LPS 340A).",NULL
387
388g_szHelpDrvWriteCache:  db  "Modern Hard Drives have a large amount of internal write cache."
389                        db  " The cache will speed up writes since the drive can free the bus right after data has been written to cache."
390                        db  " The drive then starts to write the data from cache to disk by itself."
391                        db  " This can be dangerous since all unwritten data in cache is lost if power is turned off or the system is reset."
392                        db  " Modern operating systems will flush the cache when user shuts down the system."
393                        db  " DOS does not have that sort of protection so it is up to the user to make sure cache is flushed."
394                        db  " WARNING!!! Write cache should be left disabled.",NULL
395
396g_szHelpDrvUserCHS:     db  "Specify (P-)CHS parameters manually instead of autodetecting them."
397                        db  " This can be used to limit drive size for old operating systems that do not support large hard disks."
398                        db  " Some early IDE drives have buggy autodetection so they require CHS to be specified manually."
399                        db  " Limiting Cylinders will work for all drives but drives may not accept all values for Heads and Sectors per Track.",NULL
400
401g_szHelpDrvUserLBA:     db  "Limit drive size to X million sectors for EBIOS functions. This option is useful to"
402                        db  " prevent large drive compatibility problems with MS-DOS 7.x (Windows 95 and 98).",NULL
403
404g_szMultichoiseXlateMode:
405                        db  "NORMAL",LF
406                        db  "LARGE",LF
407                        db  "Assisted LBA",LF
408                        db  "Autodetect",NULL
409
410g_szValueDrvXlateNormal:db  "NORMAL",NULL
411g_szValueDrvXlateLarge: db  "LARGE",NULL
412g_szValueDrvXlateLBA:   db  "LBA",NULL
413g_szValueDrvXlateAuto:  db  "Auto",NULL
414
415g_szMultichoiseWrCache: db  "Drive Default",LF
416                        db  "Disable Write Cache",LF
417                        db  "Enable Write Cache",NULL
418
419g_szValueDrvWrCaDis:    db  "Disabled",NULL
420g_szValueDrvWrCaEn:     db  "Enabled",NULL
421
422
423; Strings for boot settings menu
424g_szItemBootTimeout:        db  "Selection timeout",NULL
425g_szItemBootDrive:          db  "Default boot drive",NULL
426g_szItemBootDispMode:       db  "Display Mode",NULL
427g_szItemColorTheme:         db  "Color Theme",NULL
428g_szItemBootFloppyDrvs:     db  "Number of Floppy Drives",NULL
429g_szItemSerialDetect:       db  "Scan for Serial Drives",NULL
430g_szItemClearBdaDriveCount: db  "Remove other hard drives",NULL
431
432g_szDlgBootTimeout:         db  "Enter Boot Menu selection timeout in BIOS timer ticks (2...1092).",NULL
433g_szDlgBootDrive:           db  "Enter default drive number (0xh for Floppy Drives, 8xh for Hard Disks).",NULL
434g_szDlgBootDispMode:        db  "Select display mode.",NULL
435g_szDlgColorTheme:          db  "Select color theme.",NULL
436g_szDlgBootFloppyDrvs:      db  "Select number of Floppy Drives in system.",NULL
437g_szDlgSerialDetect:        db  "Scan for serial drives?",NULL
438g_szDlgClearBdaDriveCount:  db  "Remove existing INT 13h hard drives during drive detection?",NULL
439
440g_szNfoBootTimeout:         db  "Menu item selection timeout in BIOS timer ticks. 1 tick = 54.9 ms.",NULL
441g_szNfoBootDrive:           db  "Default boot drive.",NULL
442g_szNfoDispMode:            db  "Display mode to set when booting.",NULL
443g_szNfoColorTheme:          db  "Color theme used by the boot menu and the hotkey bar.",NULL
444g_szNfoBootFloppyDrvs:      db  "Number of Floppy Drives in system.",NULL
445g_szNfoSerialDetect:        db  "Scans all standard COM ports for serial drives."
446                            db  " This can also be invoked by holding down ALT at the end of normal drive detection.",NULL
447g_szNfoClearBdaDriveCount:  db  "Can be used to remove duplicate hard drives.",NULL
448
449g_szHelpBootTimeout:        db  "Boot Menu selection timeout in BIOS timer ticks (1 second = 18.2 ticks)."
450                            db  " When timer goes to zero, currently selected drive will be booted automatically."
451                            db  " Timeout can be disabled by setting this to 0.",NULL
452g_szHelpBootDrive:          db  "Drive to be set selected by default when Boot Menu is displayed.",NULL
453g_szHelpColorTheme:         db  "Pick a theme from a list of several pre-defined themes to customize the colors used by the boot menu and, if"
454                            db  " available, the hotkey bar. Selecting a theme or loading a BIOS, or its settings, from file or from ROM will"
455                            db  " make XTIDECFG apply the theme to itself for easy preview. The ability to preview themes requires that"
456                            db  " XTIDECFG is running in a display mode that can display colors. In other words, you may configure the"
457                            db  " BIOS on a machine with a monochrome graphics adapter and not be able to preview the theme but the BIOS will"
458                            db  " still use the selected theme when installed in a machine with a color graphics adapter.",NULL
459g_szHelpBootFloppyDrvs:     db  "Detecting the correct number of floppy drives might fail when using a floppy controller with its own BIOS."
460                            db  " A minimum number of floppy drives can be specified to force non-detected drives to appear on boot menu.",NULL
461g_szHelpSerialDetect:       db  "Set to Yes, at the end of normal drive detection, COM ports 1-7 (in reverse order) will be scanned for a connection"
462                            db  " to a serial drive server. This option provides flexibility with the COM port and baud rate to be used,"
463                            db  " it need not be configured ahead of time, but at the expense of a slower boot process."
464                            db  " Even when this option is set to No, this functionality can still be invoked by holding down the ALT key at the end"
465                            db  " of normal drive detection. Note that if any serial drives are detected during the normal drive detection,"
466                            db  " no scan will take place (to avoid finding the same drive twice).",NULL
467g_szHelpClearBdaDriveCount: db  "Set to NO for normal operation. Set to YES to get Windows 95 drivers to work when"
468                            db  " MODULE_WIN95_CMOS_HACK is not included (dummy drive needs to be defined in system BIOS setup).",NULL
469
470g_szMultichoiceBootDispMode:    db  "Default",LF
471                                db  "40x25 Black & White",LF
472                                db  "40x25 Color",LF
473                                db  "80x25 Black & White",LF
474                                db  "80x25 Color",LF
475                                db  "80x25 Monochrome",NULL
476
477g_szValueBootDispModeDefault:   db  "Default",NULL
478g_szValueBootDispModeBW40:      db  "BW40",NULL
479g_szValueBootDispModeCO40:      db  "CO40",NULL
480g_szValueBootDispModeBW80:      db  "BW80",NULL
481g_szValueBootDispModeCO80:      db  "CO80",NULL
482g_szValueBootDispModeMono:      db  "Mono",NULL
483
484g_szMultichoiceColorTheme:      db  "Classic (default)",LF
485                                db  "Argon Blue",LF
486                                db  "Neon Red",LF
487                                db  "Phosphor Green",LF
488                                db  "Moon Surface",LF
489                                db  "Toxic Waste",NULL
490g_szValueColorTheme0:           db  "Classic",NULL
491g_szValueColorTheme1:           db  "Argon",NULL
492g_szValueColorTheme2:           db  "Neon",NULL
493g_szValueColorTheme3:           db  "Phosphor",NULL
494g_szValueColorTheme4:           db  "Moon",NULL
495g_szValueColorTheme5:           db  "Toxic",NULL
496
497g_szMultichoiceBootFloppyDrvs:  db  "Autodetect",LF
498                                db  "1",LF
499                                db  "2",LF
500                                db  "3",LF
501g_szValueBootFloppyDrvs4:       db  "4",NULL
502g_szValueBootFloppyDrvs3:       db  "3",NULL
503g_szValueBootFloppyDrvs2:       db  "2",NULL
504g_szValueBootFloppyDrvs1:       db  "1",NULL
505g_szValueBootFloppyDrvsAuto:    db  "Auto",NULL
506
507
508; Strings for Flash menu
509g_szItemFlashStart:     db  "Start flashing",NULL
510g_szItemFlashEepromType:db  "EEPROM type",NULL
511g_szItemFlashSDP:       db  "SDP command",NULL
512g_szItemFlashAddr:      db  "EEPROM address",NULL
513g_szItemFlashPageSize:  db  "Page size",NULL
514g_szItemFlashChecksum:  db  "Generate checksum byte",NULL
515
516g_szDlgFlashEepromType: db  "Select EEPROM type.",NULL
517g_szDlgFlashSDP:        db  "Select Software Data Protection command.",NULL
518g_szDlgFlashAddr:       db  "Enter segment address where EEPROM is located.",NULL
519g_szDlgFlashPageSize:   db  "Select write page size.",NULL
520g_szDlgFlashChecksum:   db  "Generate checksum byte to the end of BIOS image?",NULL
521
522g_szNfoFlashEepromType: db  "EEPROM type.",NULL
523g_szNfoFlashStart:      db  "Writes BIOS to EEPROM.",NULL
524g_szNfoFlashSDP:        db  "Software Data Protection command.",NULL
525g_szNfoFlashAddr:       db  "Address (segment) where EEPROM is located.",NULL
526g_szNfoFlashPageSize:   db  "Number of bytes to write before delay.",NULL
527g_szNfoFlashChecksum:   db  "Generate checksum byte to the end of BIOS image.",NULL
528
529g_szHelpFlashSDP:       db  "Software Data Protection Command:",LF
530                        db  "None    = Do not use Software Data Protection. Meant for EEPROMs that do not support SDP.",LF,LF
531                        db  "Enable  = Write protects the EEPROM after flashing."
532                        db  " Software Data Protection should always be enabled if EEPROM supports it.",LF,LF
533                        db  "Disable = Disables Software Data Protection after flashing.",NULL
534
535g_szHelpFlashPageSize:  db  "Larger page size will improve write performance but not all EEPROMs support large pages or page writing at all."
536                        db  " Byte writing mode will be used when page size is set to 1. Byte writing mode is supported by all EEPROMs."
537                        db  " Large pages cannot be flashed with slow CPUs.",NULL
538
539g_szHelpFlashChecksum:  db  "PC BIOSes require a checksum byte at the end of expansion card BIOS ROMs."
540                        db  " You might not want to generate checksum byte when flashing some other images than XTIDE Universal BIOS.",NULL
541
542g_szMultichoiceEepromType:
543                        db  "2816 (2 kiB)",LF
544                        db  "2864 (8 kiB)",LF
545                        db  "2864 mod (8 kiB)",LF
546                        db  "28256 (32 kiB)",LF
547                        db  "28512 (64 kiB)",NULL
548g_szValueFlash2816:     db  "2816",NULL
549g_szValueFlash2864:     db  "2864",NULL
550g_szValueFlash2864Mod:  db  "2864mod",NULL
551g_szValueFlash28256:    db  "28256",NULL
552g_szValueFlash28512:    db  "28512",NULL
553
554g_szMultichoiceSdpCommand:
555                        db  "None",LF
556                        db  "Enable",LF
557g_szValueFlashDisable:  db  "Disable",NULL
558g_szValueFlashEnable:   db  "Enable",NULL
559g_szValueFlashNone:     db  "None",NULL
560
561g_szMultichoicePageSize:
562                        db  "1 byte",LF
563                        db  "2 bytes",LF
564                        db  "4 bytes",LF
565                        db  "8 bytes",LF
566                        db  "16 bytes",LF
567                        db  "32 bytes",LF
568g_szValueFlash64bytes:  db  "64 bytes",NULL
569g_szValueFlash32bytes:  db  "32 bytes",NULL
570g_szValueFlash16bytes:  db  "16 bytes",NULL
571g_szValueFlash8bytes:   db  "8 bytes",NULL
572g_szValueFlash4bytes:   db  "4 bytes",NULL
573g_szValueFlash2bytes:   db  "2 bytes",NULL
574g_szValueFlash1byte:    db  "1 byte",NULL
575
576g_szSelectionTimeout:   db  DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2u s",NULL
577g_szDashForZero:        db  "- ",NULL
578g_szValueUnknownError:  db  "Error!",NULL
579
Note: See TracBrowser for help on using the repository browser.