source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Main.asm @ 592

Last change on this file since 592 was 592, checked in by krille_n_, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 4.3 KB
Line 
1; Project name  :   XTIDE Universal BIOS Configurator v2
2; Description   :   Program start and exit.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Include .inc files
21
22%define INCLUDE_MENU_DIALOGS
23%define INCLUDE_SERIAL_LIBRARY
24
25%include "AssemblyLibrary.inc"  ; Assembly Library. Must be included first!
26%include "RomVars.inc"          ; XTIDE Universal BIOS variables
27%include "IdeRegisters.inc"     ; Needed for port and device autodetection
28%include "JRIDE_ISA.inc"        ; For JR-IDE/ISA default segment
29%include "ADP50L.inc"           ; For ADP50L default segment
30%include "XTCF.inc"             ; For XT-CF modes
31
32%include "Version.inc"
33%include "MenuCfg.inc"
34%include "MenuStructs.inc"
35%include "Variables.inc"
36
37
38; Section containing code
39SECTION .text
40
41
42; Program first instruction.
43ORG 100h                        ; Code starts at offset 100h (DOS .COM)
44Start:
45    jmp     Main_Start
46
47; Include library sources
48%include "AssemblyLibrary.asm"
49
50; Include sources for this program
51%include "AutoConfigure.asm"
52%include "BiosFile.asm"
53%include "Buffers.asm"
54%include "Dialogs.asm"
55%include "EEPROM.asm"
56%include "Flash.asm"
57%include "IdeAutodetect.asm"
58%include "MenuEvents.asm"
59%include "Menuitem.asm"
60%include "MenuitemPrint.asm"
61%include "Menupage.asm"
62%include "Strings.asm"
63
64%include "BootMenuSettingsMenu.asm"
65%include "ConfigurationMenu.asm"
66%include "FlashMenu.asm"
67%include "IdeControllerMenu.asm"
68%include "MainMenu.asm"
69%include "MasterSlaveMenu.asm"
70
71
72
73;--------------------------------------------------------------------
74; Program start
75;--------------------------------------------------------------------
76ALIGN JUMP_ALIGN
77Main_Start:
78    mov     ah, GET_DOS_VERSION
79    int     DOS_INTERRUPT_21h
80    cmp     al, 2
81    jae     SHORT .DosVersionIsOK
82    mov     dx, g_s$NotMinimumDosVersion
83    mov     ah, WRITE_STRING_TO_STANDARD_OUTPUT
84    int     DOS_INTERRUPT_21h
85    ret
86.DosVersionIsOK:
87
88    mov     ax, SCREEN_BACKGROUND_CHARACTER_AND_ATTRIBUTE
89    call    InitializeScreenWithBackgroundCharAndAttrInAX
90
91    call    Main_InitializeCfgVars
92    call    MenuEvents_DisplayMenu
93    mov     ax, DOS_BACKGROUND_CHARACTER_AND_ATTRIBUTE
94    call    InitializeScreenWithBackgroundCharAndAttrInAX
95
96    ; Exit to DOS
97    mov     ax, TERMINATE_WITH_RETURN_CODE<<8       ; Errorlevel 0 in AL
98    int     DOS_INTERRUPT_21h
99
100
101;--------------------------------------------------------------------
102; InitializeScreenWithBackgroundCharAndAttrInAX
103;   Parameters:
104;       AL:     Background character
105;       AH:     Background attribute
106;   Returns:
107;       Nothing
108;   Corrupts registers:
109;       AX, DX, DI
110;--------------------------------------------------------------------
111ALIGN JUMP_ALIGN
112InitializeScreenWithBackgroundCharAndAttrInAX:
113    xchg    dx, ax
114    CALL_DISPLAY_LIBRARY InitializeDisplayContext   ; Reset cursor etc
115    xchg    ax, dx
116    JMP_DISPLAY_LIBRARY ClearScreenWithCharInALandAttrInAH
117
118
119;--------------------------------------------------------------------
120; Main_InitializeCfgVars
121;   Parameters:
122;       DS:     Segment to CFGVARS
123;   Returns:
124;       Nothing
125;   Corrupts registers:
126;       AX, BX, CX, DI
127;--------------------------------------------------------------------
128ALIGN JUMP_ALIGN
129Main_InitializeCfgVars:
130    push    es
131
132    call    Buffers_Clear
133    call    EEPROM_FindXtideUniversalBiosROMtoESDI
134    jc      SHORT .InitializationCompleted
135    mov     [CFGVARS.wEepromSegment], es
136.InitializationCompleted:
137    pop     es
138    ret
139
140
141; Section containing initialized data
142SECTION .data
143
144ALIGN WORD_ALIGN
145g_cfgVars:
146istruc CFGVARS
147    at  CFGVARS.pMenupage,          dw  g_MenupageForMainMenu
148    at  CFGVARS.wFlags,             dw  DEFAULT_CFGVARS_FLAGS
149    at  CFGVARS.wEepromSegment,     dw  0
150    at  CFGVARS.bEepromType,        db  DEFAULT_EEPROM_TYPE
151    at  CFGVARS.bEepromPage,        db  DEFAULT_PAGE_SIZE
152    at  CFGVARS.bSdpCommand,        db  DEFAULT_SDP_COMMAND
153iend
154
155
156; Section containing uninitialized data
157SECTION .bss
Note: See TracBrowser for help on using the repository browser.