source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile @ 603

Last change on this file since 603 was 603, checked in by krille_n_, 12 months ago

Changes:

  • Fixed a bug in Strings.asm from r589 where building the BIOS without MODULE_STRINGS_COMPRESSED would fail. Also removed a redundant CR to save a byte when building without MODULE_STRINGS_COMPRESSED.
  • Optimized the code in MODULE_HOTKEYS to reduce ROM space usage, stack usage and time spent in the user timer tick interrupt handler (1Ch). I hope this will fix the problem with hangs introduced in r599.
File size: 14.9 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS.                                                          #
3#                                                                                                  #
4# Valid makefile targets are:                                                                      #
5# all       Removes existing files and builds binary files in \Build                               #
6# small     Builds 8 kiB binaries only (without checksum)                                          #
7# large     Builds 12 kiB binaries only (without checksum)                                         #
8# clean     Removes all files from \Build                                                          #
9# checksum* Builds all and then generates checksum byte to all binary files                        #
10# strings*  Compress src\Strings.asm to src\StringsCompressed.asm                                  #
11# unused*   Checks if there are any unused functions that can be removed to save space             #
12#                                                                                                  #
13# * at the end of target name means that Perl is required for the job.                             #
14# Build directory must be created manually if it does not exist.                                   #
15#                                                                                                  #
16#                                                                                                  #
17# Following modules can be included or excluded:                                                   #
18# MODULE_8BIT_IDE             Support for 8-BIT IDE cards like XTIDE                               #
19# MODULE_8BIT_IDE_ADVANCED    Support for memory mapped and DMA based cards like JRIDE and XTCF    #
20# MODULE_ADVANCED_ATA         Native support for some VLB IDE controllers (requires USE_386)       #
21# MODULE_COMPATIBLE_TABLES    Support for ill behaving software that tries to access DPT directly  #
22# MODULE_BOOT_MENU            Boot Menu for selection of drive to boot from                        #
23# MODULE_EBIOS                Enhanced functions for accessing drives over 8.4 GB                  #
24# MODULE_HOTKEYS              Hotkey Bar to boot from any drive                                    #
25# MODULE_IRQ                  IDE IRQ support                                                      #
26# MODULE_SERIAL               Virtual hard disks using serial port                                 #
27# MODULE_SERIAL_FLOPPY        Virtual floppy drives using serial port (requires MODULE_SERIAL)     #
28# MODULE_STRINGS_COMPRESSED   Use compressed strings to save space                                 #
29# MODULE_VERY_LATE_INIT       Initialize on INT 13h if our INT 19h handler is not called           #
30# MODULE_POWER_MANAGEMENT     Power Management support                                             #
31# MODULE_WIN95_CMOS_HACK      Hack for Windows 95 compatibility                                    #
32# MODULE_MFM_COMPATIBILITY    Restores BDA drive count for MFM controllers that expect to be the   #
33#                             only hard drive controller on the system                             #
34#                                                                                                  #
35# Not modules but these affect the assembly:                                                       #
36# ELIMINATE_CGA_SNOW          Prevents CGA snowing at the cost of a few bytes                      #
37# RELOCATE_INT13H_STACK **    Relocates INT 13h stack to beginning of stolen conventional memory   #
38# RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes         #
39# NO_ATAID_VALIDATION ***     Excludes code that tries to ensure proper communication with drives  #
40# USE_186                     Use instructions supported by 80188/80186 and V20/V30 and later      #
41# USE_286                     Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
42# USE_386                     Use instructions supported by 386 and later (defines USE_286)        #
43# USE_AT                      Use features supported on AT and later systems (not available on XT) #
44# USE_UNDOC_INTEL             Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
45# USE_NEC_V                   Optimizations for use with NEC V20/V30 processors only               #
46# CLD_NEEDED                  Only needed for compatibility with buggy software/BIOSes             #
47#                                                                                                  #
48# ** AT Builds only (when USE_AT is defined)                                                       #
49# *** Use this only when certain known good drives are not being detected (eg WD Caviars)          #
50####################################################################################################
51
52###########################################
53# Source files and destination executable #
54###########################################
55
56# Assembly source code file (*.asm):
57SRC_ASM = Src/Main.asm
58
59# Program executable file name without extension:
60PROG = ide
61
62
63#######################################
64# Destination and include directories #
65#######################################
66
67# Directory where binary file will be compiled to
68BUILD_DIR = Build
69
70# Subdirectories where included files are:
71HEADERS = Inc/
72HEADERS += Inc/Controllers/
73HEADERS += Src/
74HEADERS += Src/Handlers/
75HEADERS += Src/Handlers/Int13h/
76HEADERS += Src/Handlers/Int13h/EBIOS/
77HEADERS += Src/Handlers/Int13h/Tools/
78HEADERS += Src/Handlers/Int19h/
79HEADERS += Src/Device/
80HEADERS += Src/Device/IDE/
81HEADERS += Src/Device/MemoryMappedIDE/
82HEADERS += Src/Device/Serial/
83HEADERS += Src/Initialization/
84HEADERS += Src/Initialization/AdvancedAta/
85HEADERS += Src/Menus/
86HEADERS += Src/Menus/BootMenu/
87HEADERS += Src/Libraries/
88HEADERS += Src/VariablesAndDPTs/
89
90# Subdirectories where library files are:
91LIBS = ../Assembly_Library/Inc/
92LIBS += ../Assembly_Library/Src/
93LIBS += ../Assembly_Library/Src/Display/
94LIBS += ../Assembly_Library/Src/File/
95LIBS += ../Assembly_Library/Src/Keyboard/
96LIBS += ../Assembly_Library/Src/Menu/
97LIBS += ../Assembly_Library/Src/Menu/Dialog/
98LIBS += ../Assembly_Library/Src/String/
99LIBS += ../Assembly_Library/Src/Time/
100LIBS += ../Assembly_Library/Src/Util/
101LIBS += ../Assembly_Library/Src/Serial/
102LIBS += ../XTIDE_Universal_BIOS/Inc/
103HEADERS += $(LIBS)
104
105
106#################################################################
107# Assembler preprocessor defines.                               #
108#################################################################
109DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT RESERVE_DIAGNOSTIC_CYLINDER NO_ATAID_VALIDATION CLD_NEEDED
110DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
111
112DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
113DEFINES_XTPLUS = $(DEFINES_XT) USE_186
114DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
115
116DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
117DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
118DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
119
120DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION CLD_NEEDED
121DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN95_CMOS_HACK
122DEFINES_386_LARGE = $(DEFINES_386) $(DEFINES_COMMON_LARGE)
123
124
125###################
126# Other variables #
127###################
128
129# Target size of the BIOS, used in Main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
130# Note! The size must be a multiple of 2 KB for compatibility reasons.
131BIOS_SIZE_TINY = 4096
132BIOS_SIZE_SMALL = 8192
133BIOS_SIZE_LARGE = 10240
134
135# Add -D in front of every preprocessor define declaration
136DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
137DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
138DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
139DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
140DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
141DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
142DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
143DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
144DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
145
146# Add -I in front of all header directories
147IHEADERS = $(HEADERS:%=-I%)
148
149# Path + target file to be built
150TARGET = $(BUILD_DIR)/$(PROG)
151
152#########################
153# Compilers and linkers #
154#########################
155
156# Make
157MAKE = mingw32-make.exe
158
159# Assembler
160AS = nasm.exe
161
162# use this command to erase files.
163RM = -del /Q
164
165
166#############################
167# Compiler and linker flags #
168#############################
169
170# Assembly compiler flags
171ASFLAGS = -f bin                # Produce binary object files
172ASFLAGS += $(IHEADERS)          # Set header file directory paths
173ASFLAGS += -Worphan-labels      # Warn about labels without colon
174ASFLAGS += -Ox                  # Optimize operands to their shortest forms
175
176
177############################################
178# Build process. Actual work is done here. #
179############################################
180
181all: clean small large
182    @echo All done!
183
184small: xt_tiny xt xtplus at 386
185    @echo All small binaries built!
186
187large: xt_large xtplus_large at_large 386_large
188    @echo All large binaries built!
189
190at:
191    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
192    @echo * Small AT version "$(TARGET)_at.bin" built.
193
194at_large:
195    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
196    @echo * Large AT version "$(TARGET)_atl.bin" built.
197
198xtplus:
199    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
200    @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
201
202xtplus_large:
203    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
204    @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
205
206xt:
207    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
208    @echo * Small XT version "$(TARGET)_xt.bin" built.
209
210xt_large:
211    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
212    @echo * Large XT version "$(TARGET)_xtl.bin" built.
213
214xt_tiny:
215    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
216    @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
217
218386:
219    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
220    @echo * Small 386 version "$(TARGET)_386.bin" built.
221
222386_large:
223    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
224    @echo * Large 386 version "$(TARGET)_386l.bin" built.
225
226strings: src\Strings.asm
227    @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
228    @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
229    @echo StringsCompressed.asm updated!
230
231clean:
232    @$(RM) $(BUILD_DIR)\*.*
233    @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
234
235checksum: all
236    @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
237    @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
238    @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
239    @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
240    @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
241    @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
242    @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
243    @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
244    @perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
245
246unused:
247    @echo "XT Tiny"
248    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -l"$(TARGET)_unused_tiny.lst"
249    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
250    @perl ..\Tools\unused.pl $(TARGET)_unused_tiny.lst $(TARGET)_unused_tiny.asm
251    @echo "XT Small"
252    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
253    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
254    @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
255    @echo "XT Large"
256    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
257    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
258    @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
259    @echo "XT Plus Small"
260    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -l"$(TARGET)_unused_xtp.lst"
261    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
262    @perl ..\Tools\unused.pl $(TARGET)_unused_xtp.lst $(TARGET)_unused_xtp.asm
263    @echo "XT Plus Large"
264    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -l"$(TARGET)_unused_xtpl.lst"
265    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
266    @perl ..\Tools\unused.pl $(TARGET)_unused_xtpl.lst $(TARGET)_unused_xtpl.asm
267    @echo "AT Small"
268    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
269    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
270    @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
271    @echo "AT Large"
272    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
273    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
274    @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
275    @echo "386 Small"
276    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -l"$(TARGET)_unused_386.lst"
277    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
278    @perl ..\Tools\unused.pl $(TARGET)_unused_386.lst $(TARGET)_unused_386.asm
279    @echo "386 Large"
280    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -l"$(TARGET)_unused_386l.lst"
281    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
282    @perl ..\Tools\unused.pl $(TARGET)_unused_386l.lst $(TARGET)_unused_386l.asm
283
Note: See TracBrowser for help on using the repository browser.