source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile @ 397

Last change on this file since 397 was 397, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Cleaned some code concerning recent module changes.
  • Removed drive number translation flag from ROMVARS.
  • BOOTMENUINFO is now DRVDETECTINFO.
  • Makefile now builds tiny binary (XT build with minimal features).
File size: 9.7 KB
RevLine 
[379]1##################################################################################################
2# Makefile to build XTIDE Universal BIOS.                                                        #
3#                                                                                                #
4# Valid makefile targets are:                                                                    #
[389]5# all       Removes existing files and builds binary files in \Build                             #
6# small     Builds 8 kiB binaries only (without checksum)                                        #
7# large     Builds 15 kiB binaries only (without checksum)                                       #
8# clean     Removes all files from \Build                                                        #
9# checksum* Builds all and then generates checksum byte to all binary files                      #
10# strings*  Compress src\Strings.asm to src\StringsCompressed.asm                                #
[379]11#                                                                                                #
12# * at the end of target name means that Perl is required for the job.                           #
13# Build directory must be created manually if it does not exist.                                 #
14#                                                                                                #
15#                                                                                                #
16# Following modules can be included or excluded:                                                 #
17# MODULE_ADVANCED_ATA       Native support for some VLB IDE controllers                          #
[380]18# MODULE_BOOT_MENU          Boot Menu for selection of drive to boot from                        #
19# MODULE_EBIOS              Enhanced functions for accessing drives over 8.4 GB                  #
[395]20# MODULE_HOTKEYS            Hotkey Bar to boot from any drive                                    #
[379]21# MODULE_JRIDE              Support for JR-IDE/ISA                                               #
22# MODULE_SERIAL             Virtual hard disks using serial port                                 #
[380]23# MODULE_SERIAL_FLOPPY      Virtual floppy drives using serial port (requires MODULE_SERIAL)     #
24# MODULE_STRINGS_COMPRESSED Use compressed strings to save space                                 #
[379]25#                                                                                                #
26# Not modules but these affect the assembly:                                                     #
[380]27# ELIMINATE_CGA_SNOW        Prevents CGA snowing at the cost of a few bytes                      #
[379]28# USE_186                   Use instructions supported by 80188/80186 and V20/V30 and later      #
29# USE_286                   Use instructions supported by 286 and later                          #
30# USE_386                   Use instructions supported by 386 and later                          #
31# USE_AT                    Use features supported on AT and later systems (not available on XT) #
32#                                                                                                #
33##################################################################################################
[3]34
35###########################################
36# Source files and destination executable #
37###########################################
38
39# Assembly source code file (*.asm):
40SRC_ASM = Src/Main.asm
41
42# Program executable file name without extension:
43PROG = ide
44
45
46#######################################
47# Destination and include directories #
48#######################################
49
50# Directory where binary file will be compiled to
51BUILD_DIR = Build
52
53# Subdirectories where included files are:
54HEADERS = Inc/
[363]55HEADERS += Inc/Controllers/
[3]56HEADERS += Src/
57HEADERS += Src/Handlers/
58HEADERS += Src/Handlers/Int13h/
[165]59HEADERS += Src/Handlers/Int13h/EBIOS/
60HEADERS += Src/Handlers/Int13h/Tools/
[392]61HEADERS += Src/Handlers/Int19h/
[150]62HEADERS += Src/Device/
63HEADERS += Src/Device/IDE/
[238]64HEADERS += Src/Device/MemoryMappedIDE/
[150]65HEADERS += Src/Device/Serial/
[3]66HEADERS += Src/Initialization/
[392]67HEADERS += Src/Initialization/AdvancedAta/
68HEADERS += Src/Menus/
69HEADERS += Src/Menus/BootMenu/
[3]70HEADERS += Src/Libraries/
71HEADERS += Src/VariablesAndDPTs/
72
[88]73# Subdirectories where library files are:
74LIBS = ../Assembly_Library/Inc/
75LIBS += ../Assembly_Library/Src/
76LIBS += ../Assembly_Library/Src/Display/
77LIBS += ../Assembly_Library/Src/File/
78LIBS += ../Assembly_Library/Src/Keyboard/
79LIBS += ../Assembly_Library/Src/Menu/
80LIBS += ../Assembly_Library/Src/Menu/Dialog/
81LIBS += ../Assembly_Library/Src/String/
82LIBS += ../Assembly_Library/Src/Time/
83LIBS += ../Assembly_Library/Src/Util/
[277]84LIBS += ../Assembly_Library/Src/Serial/
[88]85LIBS += ../XTIDE_Universal_BIOS/Inc/
86HEADERS += $(LIBS)
[3]87
[88]88
[3]89#################################################################
90# Assembler preprocessor defines.                               #
91#################################################################
[395]92DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_EBIOS
[397]93DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_JRIDE MODULE_SERIAL MODULE_SERIAL_FLOPPY
[389]94
[397]95DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_JRIDE MODULE_SERIAL MODULE_SERIAL_FLOPPY
96DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186
97DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_ADVANCED_ATA
[389]98
[397]99DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
100DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
101DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
[389]102
[397]103DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED
104DEFINES_386_8K = $(DEFINES_AT) USE_386
[3]105
106
107###################
108# Other variables #
109###################
110
[239]111# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
112ROMSIZE = 8192
113ROMSIZE_LARGE = 15360
114
[3]115# Add -D in front of every preprocessor define declaration
[239]116DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
117DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
118DEFS_AT = $(DEFINES_AT:%=-D%) -DROMSIZE=$(ROMSIZE)
119DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
120DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
121DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
[397]122DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DROMSIZE=$(ROMSIZE)
[366]123DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
[3]124
125# Add -I in front of all header directories
126IHEADERS = $(HEADERS:%=-I%)
127
[145]128# Path + target file to be built
[3]129TARGET = $(BUILD_DIR)/$(PROG)
130
131#########################
132# Compilers and linkers #
133#########################
134
135# Make
136MAKE = mingw32-make.exe
137
138# Assembler
[188]139AS = nasm.exe
[3]140
141# use this command to erase files.
142RM = -del /Q
143
144
145#############################
146# Compiler and linker flags #
147#############################
148
149# Assembly compiler flags
150ASFLAGS = -f bin                # Produce binary object files
151ASFLAGS += $(IHEADERS)          # Set header file directory paths
152ASFLAGS += -Worphan-labels      # Warn about labels without colon
[379]153ASFLAGS += -Ox                  # Optimize operands to their shortest forms
[3]154
155
156############################################
157# Build process. Actual work is done here. #
158############################################
159
[272]160all: clean small large
[145]161    @echo All done!
[3]162
[397]163small: xt_tiny xt xtplus at 386_8k
[294]164    @echo All 8 kiB binaries built!
[272]165
[397]166large: xt_large xtplus_large at_large
[294]167    @echo All 15 kiB binaries built!
[272]168
[3]169at:
[80]170    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[272]171    @echo * 8k AT version "$(TARGET)_at.bin" built.
[3]172
[238]173at_large:
174    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[272]175    @echo *15k AT version "$(TARGET)_atl.bin" built.
[238]176
[3]177xtplus:
[80]178    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[294]179    @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
[3]180
[238]181xtplus_large:
182    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[294]183    @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
[238]184
[3]185xt:
[80]186    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[272]187    @echo * 8k XT version "$(TARGET)_xt.bin" built.
[3]188
[238]189xt_large:
190    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[272]191    @echo *15k XT version "$(TARGET)_xtl.bin" built.
[277]192
[397]193xt_tiny:
194    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
195    @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
[238]196
[366]197386_8k:
198    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
199    @echo * 8k 386 version "$(TARGET)_386.bin" built.
200
[322]201strings: src\Strings.asm
202    @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_XT) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
203    @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
204    @echo StringsCompressed.asm updated!
[252]205
[3]206clean:
207    @$(RM) $(BUILD_DIR)\*.*
208    @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[186]209
[294]210checksum: all
[397]211    @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
212    @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
213    @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
214    @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
215    @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
216    @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
[240]217    @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
[369]218    @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
[203]219
[252]220xt_unused: xt
[370]221    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
222    @perl ..\tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
[194]223
Note: See TracBrowser for help on using the repository browser.