source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm @ 568

Last change on this file since 568 was 568, checked in by krille_n_@…, 9 years ago

Changes:

  • SerDrive: Using named pipe mode (serdrive -p) now works under Windows XP/2000/Server 2003.
  • checksum.pl: Added a compatibility fix for 3Com 3C503 cards.
  • XTIDECFG will now scan every possible segment address to find and load the BIOS and/or its settings from EEPROM. This should simplify things for people using combined option ROMs.
  • Fixed a bug from r521 in BootSector.asm where the BIOS would not display a timeout error if it failed to load the boot sector from harddrive.
  • Fixed a bug from r541 in CompatibleDPT.asm where CompatibleDPT_CreateDeviceParameterTableExtensionToESBXfromDPTinDSSI would generate an invalid checksum in the DPTE.
  • Optimizations and other fixes.
File size: 9.7 KB
RevLine 
[99]1; Project name  :   XTIDE Universal BIOS
[3]2; Description   :   Functions for creating Disk Parameter Table.
3
[376]4;
[445]5; XTIDE Universal BIOS and Associated Tools
[526]6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[376]7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
[445]12;
[376]13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
[445]16; GNU General Public License for more details.
[376]17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
[445]18;
[376]19
[3]20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Creates new Disk Parameter Table for detected hard disk.
25; Drive is then fully accessible using any BIOS function.
26;
27; CreateDPT_FromAtaInformation
28;   Parameters:
29;       BH:     Drive Select byte for Drive and Head Register
[473]30;       DX:     Autodetected port (for devices that support autodetection)
[3]31;       ES:SI:  Ptr to 512-byte ATA information read from the drive
32;       CS:BP:  Ptr to IDEVARS for the controller
33;       DS:     RAMVARS segment
34;       ES:     BDA Segment
35;   Returns:
[558]36;       DS:DI:  Ptr to Disk Parameter Table
37;       CF:     Cleared
[3]38;   Corrupts registers:
[542]39;       AX, BX, CX, DX
[3]40;--------------------------------------------------------------------
41CreateDPT_FromAtaInformation:
[150]42    call    FindDPT_ForNewDriveToDSDI
[99]43    ; Fall to .InitializeDPT
[3]44
45;--------------------------------------------------------------------
[99]46; .InitializeDPT
[3]47;   Parameters:
48;       BH:     Drive Select byte for Drive and Head Register
[473]49;       DX:     Autodetected port (for devices that support autodetection)
[3]50;       DS:DI:  Ptr to Disk Parameter Table
51;       CS:BP:  Ptr to IDEVARS for the controller
52;   Returns:
[150]53;       Nothing
[3]54;   Corrupts registers:
[150]55;       AX
[3]56;--------------------------------------------------------------------
[99]57.InitializeDPT:
[473]58    call    CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
[150]59    ; Fall to .StoreDriveSelectAndDriveControlByte
[3]60
61;--------------------------------------------------------------------
[150]62; .StoreDriveSelectAndDriveControlByte
[3]63;   Parameters:
64;       BH:     Drive Select byte for Drive and Head Register
65;       DS:DI:  Ptr to Disk Parameter Table
66;       ES:SI:  Ptr to 512-byte ATA information read from the drive
67;       CS:BP:  Ptr to IDEVARS for the controller
68;   Returns:
[99]69;       Nothing
[3]70;   Corrupts registers:
71;       AX
72;--------------------------------------------------------------------
[150]73.StoreDriveSelectAndDriveControlByte:
74    mov     al, bh
75    and     ax, BYTE FLG_DRVNHEAD_DRV       ; AL now has Master/Slave bit
[411]76%ifdef MODULE_IRQ
[150]77    cmp     [cs:bp+IDEVARS.bIRQ], ah        ; Interrupts enabled?
78    jz      SHORT .StoreFlags               ;  If not, do not set interrupt flag
[158]79    or      al, FLGL_DPT_ENABLE_IRQ
[150]80.StoreFlags:
[411]81%endif
[150]82    mov     [di+DPT.wFlags], ax
[421]83    ; Fall to .StoreCHSparametersAndAddressingMode
[3]84
85;--------------------------------------------------------------------
[421]86; .StoreCHSparametersAndAddressingMode
[3]87;   Parameters:
88;       DS:DI:  Ptr to Disk Parameter Table
89;       ES:SI:  Ptr to 512-byte ATA information read from the drive
90;       CS:BP:  Ptr to IDEVARS for the controller
91;   Returns:
[227]92;       Nothing
[3]93;   Corrupts registers:
[227]94;       AX, BX, CX, DX
[3]95;--------------------------------------------------------------------
[421]96.StoreCHSparametersAndAddressingMode:
[542]97    ; Apply any user limited values to ATA ID
98    call    AtaID_ModifyESSIforUserDefinedLimitsAndReturnTranslateModeInDX
[173]99
[422]100    ; Translate P-CHS to L-CHS
[549]101    call    AtaGeometry_GetLCHStoAXBLBHfromAtaInfoInESSIwithTranslateModeInDX
[421]102    mov     [di+DPT.wLchsCylinders], ax
103    mov     [di+DPT.wLchsHeadsAndSectors], bx
[542]104    mov     al, dl
105    eSHL_IM al, TRANSLATEMODE_FIELD_POSITION
106    or      cl, al
[421]107
[542]108    ; Store P-CHS and flags
[421]109    call    AtaGeometry_GetPCHStoAXBLBHfromAtaInfoInESSI
[547]110    dec     dl                      ; Set ZF if TRANSLATEMODE_LARGE, SF if TRANSLATEMODE_NORMAL
[567]111    jle     SHORT .JumpOverSetBitForAssistedLBA
[542]112
[549]113    ; Set LBA bit for Assisted LBA
114    or      cl, FLGL_DPT_LBA
[567]115.JumpOverSetBitForAssistedLBA:
116    jnz     SHORT .NothingToChange
[549]117
118    ; We cannot have 16 P-Heads heads in Revised ECHS mode (8193 or more cylinders)
119    ; but 16 heads are allowed when there are 8192 or less cylinders (ECHS).
120    ; Both of these are LARGE modes so do not confuse with NORMAL mode.
121    call    AtaGeometry_IsDriveSmallEnoughForECHS
[568]122    adc     bx, -1                  ; Adjust 16 P-Heads to 15 if needed
[549]123
[542]124.NothingToChange:
125    or      [di+DPT.bFlagsLow], cl  ; Shift count and addressing mode
126    mov     [di+DPT.wPchsHeadsAndSectors], bx
[550]127%ifdef MODULE_COMPATIBLE_TABLES OR MODULE_EBIOS
[544]128    ; Store P-Cylinders here for Compatible DPTs when FLGL_DPT_LBA is not set
129    ; or when drive has over 15,482,880 sectors
130    mov     [di+DPT.wPchsCylinders], ax
[550]131%endif
132
133%ifdef MODULE_EBIOS
[542]134    test    cl, FLGL_DPT_LBA
135    jz      SHORT .NoLbaSoNoEBIOS
[533]136
[542]137    ; Store P-Cylinders but only if we have 15,482,880 or less sectors since
138    ; we only need P-Cylinders so we can return it from AH=48h
139    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
[544]140    sub     ax, (MAX_SECTOR_COUNT_TO_RETURN_PCHS+1) & 0FFFFh
141    sbb     dx, (MAX_SECTOR_COUNT_TO_RETURN_PCHS+1) >> 16
[542]142    sbb     bx, BYTE 0
[544]143    jnc     SHORT .StoreNumberOfLbaSectors
[533]144
[542]145    ; Since we might have altered the default P-CHS parameters to be
146    ; presented to the drive (AH=09h), we need to calculate new
147    ; P-Cylinders. It could be read from the ATA ID after
148    ; COMMAND_INITIALIZE_DEVICE_PARAMETERS but that is too much trouble.
149    ; P-Cyls = MIN(16383*16*63, LBA sector count) / (P-Heads * P-Sectors per track)
150    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
151    xchg    cx, ax                          ; Sector count to DX:CX
152    mov     al, [di+DPT.bPchsHeads]
153    mul     BYTE [di+DPT.bPchsSectorsPerTrack]
154    xchg    cx, ax
155    div     cx                              ; AX = new P-Cylinders
[543]156
157    ; We could remove wPchsCylinders from DPT if we calculate it on AH=48h
[544]158    ; (and for compatible DPTs) but that would require extra code so we save ROM space instead.
[421]159    mov     [di+DPT.wPchsCylinders], ax
[542]160
[543]161    ; Store CHS sector count as total sector count. We must not use
162    ; LBA sector count if it is 15,482,880 or less.
[542]163    mul     cx
164    xor     bx, bx
[543]165    jmp     SHORT .StoreTotalSectorsFromBXDXAX
[421]166
[558]167
[421]168;--------------------------------------------------------------------
169; .StoreNumberOfLbaSectors
170;   Parameters:
171;       DS:DI:  Ptr to Disk Parameter Table
172;       ES:SI:  Ptr to 512-byte ATA information read from the drive
173;       CS:BP:  Ptr to IDEVARS for the controller
174;   Returns:
175;       Nothing
176;   Corrupts registers:
177;       AX, BX, CX, DX
178;--------------------------------------------------------------------
[542]179.StoreNumberOfLbaSectors:
[421]180    ; Store LBA 28/48 total sector count
181    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
[543]182    or      [di+DPT.bFlagsLow], cl      ; LBA48 flag
183.StoreTotalSectorsFromBXDXAX:
[542]184    mov     [di+DPT.twLbaSectors], ax
185    mov     [di+DPT.twLbaSectors+2], dx
186    mov     [di+DPT.twLbaSectors+4], bx
187.NoLbaSoNoEBIOS:
[421]188%endif ; MODULE_EBIOS
[150]189    ; Fall to .StoreDeviceSpecificParameters
[3]190
191;--------------------------------------------------------------------
[150]192; .StoreDeviceSpecificParameters
[3]193;   Parameters:
194;       DS:DI:  Ptr to Disk Parameter Table
195;       ES:SI:  Ptr to 512-byte ATA information read from the drive
[160]196;       CS:BP:  Ptr to IDEVARS for the controller
[3]197;   Returns:
[99]198;       Nothing
[3]199;   Corrupts registers:
[150]200;       AX, BX, CX, DX
[3]201;--------------------------------------------------------------------
[150]202.StoreDeviceSpecificParameters:
203    call    Device_FinalizeDPT
[258]204
[262]205;----------------------------------------------------------------------
206; Update drive counts (hard and floppy)
[294]207;----------------------------------------------------------------------
[558]208%ifdef MODULE_SERIAL
209; Device_FinalizeDPT returns with CF set only when a floppy was found which can't happen without MODULE_SERIAL
[258]210%ifdef MODULE_SERIAL_FLOPPY
211;
212; These two instructions serve two purposes:
213; 1. If the drive is a floppy drive (CF set), then we effectively increment the counter.
[294]214; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is
[258]215;    effectively discarded.  This is more of a safety check then code that should ever normally be hit (see below).
[294]216;    Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT,
[258]217;    this was necessary.  Now, this situation shouldn't happen in normal operation, for a couple of reasons:
[567]218;       A. xtidecfg always puts configured serial ports at the end of the IDEVARS list
219;       B. the auto serial code is always executed last
220;       C. the serial server always returns floppy drives last
[258]221;
222    adc     byte [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt], 0
[294]223    jnz     .AllDone
[558]224%else ; ~MODULE_SERIAL_FLOPPY
[258]225;
226; Even without floppy support enabled, we shouldn't try to mount a floppy image as a hard disk, which
[294]227; could lead to unpredictable results since no MBR will be present, etc.  The server doesn't know that
[258]228; floppies are supported, so it is important to still fail here if a floppy is seen during the drive scan.
229;
230    jc      .AllDone
[558]231%endif ; MODULE_SERIAL_FLOPPY
232%endif ; MODULE_SERIAL
[258]233
[150]234    inc     BYTE [RAMVARS.bDrvCnt]      ; Increment drive count to RAMVARS
[294]235
[558]236%ifdef MODULE_SERIAL
[294]237.AllDone:
[162]238    clc
[558]239%endif
240
[3]241    ret
[258]242
[324]243
[422]244;--------------------------------------------------------------------
[473]245; CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
246;   Parameters:
247;       DX:     Autodetected port (for devices that support autodetection)
248;       DS:DI:  Ptr to Disk Parameter Table
249;       CS:BP:  Ptr to IDEVARS for the controller
250;   Returns:
251;       Nothing
252;   Corrupts registers:
253;       AX
254;--------------------------------------------------------------------
255CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI:
256    mov     [di+DPT.bIdevarsOffset], bp     ; IDEVARS must start in first 256 bytes of ROM
257    mov     ax, [cs:bp+IDEVARS.wBasePort]
258    mov     [di+DPT.wBasePort], ax
259    ret
Note: See TracBrowser for help on using the repository browser.