source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm@ 588

Last change on this file since 588 was 588, checked in by krille_n_@…, 10 years ago

Changes:

  • Fixed a bug in AH24h_HSetBlocks.asm from r550. Trying to set a too large block size with an XT-CF card in DMA transfer mode would corrupt the stack.
  • Fixed a bug from r545 where the list of devices under g_szDeviceTypeValues in Strings.asm was no longer up to date causing the boot menu to display the wrong string for devices numbered higher than DEVICE_8BIT_XTCF_PIO8.
  • Made some fairly significant changes to the XT-CF code to reduce size. Two changes in functionality; 1) Added a simple check to validate the request for a change of the XT-CF transfer mode. 2) Changing transfer mode to use DMA no longer calls AH24h_SetBlockSize if the block size already is within the limits of DMA transfers. UNTESTED
  • XTIDECFG now clears IDEVARS.bIRQ when changing IDE controller to a serial device to keep the boot menu from displaying it since the serial device doesn't use IRQs at all.
  • Other minor optimizations.
File size: 12.2 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Strings and equates for BIOS messages.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
21 %include "Display.inc"
22%endif
23
24; Section containing code
25SECTION .text
26
27; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
28; To support an optimization in that code, these strings must start on the same 256 byte page,
29; which is checked at assembly time below.
30;
31g_szDetectStart:
32g_szDetectMaster: db "Master",NULL
33g_szDetectSlave: db "Slave ",NULL
34g_szDetectOuter: db "%s at %s: ",NULL
35%ifdef MODULE_SERIAL
36g_szDetectCOM: db "COM%c%s",NULL
37g_szDetectCOMAuto: db " Detect",NULL
38g_szDetectCOMSmall: db "/%u%u00",NULL ; IDE Master at COM1/9600:
39g_szDetectCOMLarge: db "/%u.%uK",NULL ; IDE Master at COM1/19.2K:
40%endif
41g_szDetectEnd:
42g_szDetectPort: db "%x",NULL ; IDE Master at 1F0h:
43
44%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
45 %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
46 %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP. Please move this block up or down within Strings.asm"
47 %endif
48%endif
49
50
51; POST drive detection strings
52g_szDashForZero: db "- ",NULL ; Required by Display Library
53g_szRomAt: db LF,CR
54 db "%s @ %x",LF,CR ; -=XTIDE ... =- @ Segment
55 db "%s",LF,CR ; version string
56 db "Released under GNU GPL v2",LF,CR
57 db LF,CR,NULL
58%ifdef MODULE_BOOT_MENU
59g_szBootMenuTitle: db "%s%c",LF,CR ; -=XTIDE ... =- and null (eaten)
60 db "%s",NULL ; version string
61%endif
62g_szDriveName: db "%z",LF,CR,NULL
63
64
65; Boot loader strings
66g_szTryToBoot: db "Booting %c",ANGLE_QUOTE_RIGHT,"%c",LF,CR,NULL
67g_szBootSectorNotFound: db "Boot sector " ; String fall through...
68g_szNotFound: db "not found",LF,CR,NULL
69g_szReadError: db "Error %x!",LF,CR,NULL
70
71
72%ifdef MODULE_HOTKEYS
73; Hotkey Bar strings
74g_szFDD: db "FDD [%c]",NULL ; "FDD [A]"
75g_szHDD: db "HDD [%c]",NULL ; "HDD [C]"
76%ifdef MODULE_BOOT_MENU
77g_szBootMenu: db "BootMnu%c",NULL ; "BootMnu", location of %c doesn't matter
78%endif ; MODULE_BOOT_MENU
79g_szHotkey: db "%A%c%c%A%s%A ",NULL ; "C»HDD [A] ", "F2BootMnu " or "F8RomBoot "
80%ifdef MODULE_SERIAL
81g_szHotComDetect: db "ComDtct%c",NULL ; "ComDtct", location of %c doesn't matter
82%endif ; MODULE_SERIAL
83%endif ; MODULE_HOTKEYS
84
85%ifdef MODULE_BOOT_MENU
86g_szRomBootDash: db " - " ; String fall through to g_szRomBoot
87%endif
88%ifdef MODULE_HOTKEYS OR MODULE_BOOT_MENU
89g_szRomBoot: db "Rom%cBoot",NULL ; "RomBoot" or "Rom Boot"
90%endif
91
92
93%ifdef MODULE_BOOT_MENU
94; Boot Menu Floppy Disk strings
95;
96; The following strings are used by BootMenuPrint_RefreshInformation
97; To support optimizations in that code, these strings must start on the same 256 byte page,
98; which is checked at assembly time below.
99;
100g_szFddStart:
101g_szFddUnknown: db "Unknown",NULL
102g_szFddSizeOr: db "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
103g_szFddSize: db "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
104g_szFddThreeHalf: db "3",ONE_HALF,NULL
105g_szFddEnd:
106g_szFddFiveQuarter: db "5",ONE_QUARTER,NULL
107
108%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
109 %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
110 %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives. Please move this block up or down within Strings.asm"
111 %endif
112%endif
113
114
115g_szAddressingModes:
116g_szNORMAL: db "NORMAL",NULL
117g_szLARGE: db "LARGE ",NULL
118g_szLBA: db "LBA ",NULL
119g_szAddressingModes_Displacement equ (g_szLARGE - g_szAddressingModes)
120;
121; Ensure that addressing modes are correctly spaced in memory
122;
123%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
124 %if g_szNORMAL <> g_szAddressingModes
125 %error "g_szAddressingModes Displacement Incorrect 1"
126 %endif
127 %if g_szLARGE <> g_szNORMAL + g_szAddressingModes_Displacement
128 %error "g_szAddressingModes Displacement Incorrect 2"
129 %endif
130 %if g_szLBA <> g_szLARGE + g_szAddressingModes_Displacement
131 %error "g_szAddressingModes Displacement Incorrect 3"
132 %endif
133%endif
134
135
136g_szDeviceTypeValues:
137g_szDeviceTypeValues_16bit: db " 16",NULL
138g_szDeviceTypeValues_32bit: db " 32",NULL
139g_szDeviceTypeValues_8bit: db " 8",NULL
140g_szDeviceTypeValues_XTIDEr1: db "D8 ",NULL ; Dual 8-bit
141g_szDeviceTypeValues_XTIDEr2: db "X8 ",NULL ; A0<->A3 swapped 8-bit
142g_szDeviceTypeValues_XTCFpio8: db "T8 ",NULL ; True 8-bit
143g_szDeviceTypeValues_XTCFpio8BIU: db "T8B",NULL
144g_szDeviceTypeValues_XTCFpio16BIU: db "16B",NULL
145g_szDeviceTypeValues_XTCFdma: db "8MA",NULL ; DMA 8-bit
146g_szDeviceTypeValues_JrIde: db "M8 ",NULL ; Memory Mapped 8-bit
147g_szDeviceTypeValues_ADP50L: db "M8 ",NULL ; Memory Mapped 8-bit
148g_szDeviceTypeValues_Serial: db "SER",NULL
149
150g_szDeviceTypeValues_Displacement equ (g_szDeviceTypeValues_32bit - g_szDeviceTypeValues)
151;
152; Ensure that device type strings are correctly spaced in memory
153;
154%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
155 %if g_szDeviceTypeValues_16bit <> g_szDeviceTypeValues
156 %error "g_szDeviceTypeValues Displacement Incorrect 1"
157 %endif
158 %if g_szDeviceTypeValues_32bit <> g_szDeviceTypeValues_16bit + g_szDeviceTypeValues_Displacement
159 %error "g_szDeviceTypeValues Displacement Incorrect 2"
160 %endif
161 %if g_szDeviceTypeValues_8bit <> g_szDeviceTypeValues_32bit + g_szDeviceTypeValues_Displacement
162 %error "g_szDeviceTypeValues Displacement Incorrect 3"
163 %endif
164 %if g_szDeviceTypeValues_XTIDEr1 <> g_szDeviceTypeValues_8bit + g_szDeviceTypeValues_Displacement
165 %error "g_szDeviceTypeValues Displacement Incorrect 4"
166 %endif
167 %if g_szDeviceTypeValues_XTIDEr2 <> g_szDeviceTypeValues_XTIDEr1 + g_szDeviceTypeValues_Displacement
168 %error "g_szDeviceTypeValues Displacement Incorrect 5"
169 %endif
170 %if g_szDeviceTypeValues_XTCFpio8 <> g_szDeviceTypeValues_XTIDEr2 + g_szDeviceTypeValues_Displacement
171 %error "g_szDeviceTypeValues Displacement Incorrect 6"
172 %endif
173 %if g_szDeviceTypeValues_XTCFpio8BIU <> g_szDeviceTypeValues_XTCFpio8 + g_szDeviceTypeValues_Displacement
174 %error "g_szDeviceTypeValues Displacement Incorrect 7"
175 %endif
176 %if g_szDeviceTypeValues_XTCFpio16BIU <> g_szDeviceTypeValues_XTCFpio8BIU + g_szDeviceTypeValues_Displacement
177 %error "g_szDeviceTypeValues Displacement Incorrect 8"
178 %endif
179 %if g_szDeviceTypeValues_XTCFdma <> g_szDeviceTypeValues_XTCFpio16BIU + g_szDeviceTypeValues_Displacement
180 %error "g_szDeviceTypeValues Displacement Incorrect 9"
181 %endif
182 %if g_szDeviceTypeValues_JrIde <> g_szDeviceTypeValues_XTCFdma + g_szDeviceTypeValues_Displacement
183 %error "g_szDeviceTypeValues Displacement Incorrect 10"
184 %endif
185 %if g_szDeviceTypeValues_ADP50L <> g_szDeviceTypeValues_JrIde + g_szDeviceTypeValues_Displacement
186 %error "g_szDeviceTypeValues Displacement Incorrect 11"
187 %endif
188 %if g_szDeviceTypeValues_Serial <> g_szDeviceTypeValues_ADP50L + g_szDeviceTypeValues_Displacement
189 %error "g_szDeviceTypeValues Displacement Incorrect 12"
190 %endif
191%endif
192
193
194g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
195
196
197; Boot Menu menuitem strings
198;
199; The following strings are used by BootMenuPrint_* routines.
200; To support optimizations in that code, these strings must start on the same 256 byte page,
201; which is checked at assembly time below.
202;
203g_szDriveNumSpace: db " " ; leading space, used if drive number is less than 0fh
204 ; must come immediately before g_szDriveNum!
205g_szBootMenuPrintStart:
206g_szDriveNum: db "%x %s",NULL
207g_szDriveNumBNSpace: db " " ; leading space, used if drive number is less than 0fh
208 ; must come immediately before g_szDriveNumBOOTNFO!
209g_szDriveNumBOOTNFO: db "%x %z",NULL
210g_szFloppyDrv: db "Floppy Drive %c",NULL
211g_szBootMenuPrintEnd:
212g_szForeignHD: db "Foreign Hard Disk",NULL
213
214%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
215 %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
216 %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines. Please move this block up or down within Strings.asm"
217 %endif
218 %if g_szDriveNumSpace+1 != g_szDriveNum || g_szDriveNumBNSpace+1 != g_szDriveNumBOOTNFO
219 %error "g_szDriveNumSpace or g_szDriveNumBNSpace are out of position"
220 %endif
221%endif
222
223
224; Boot Menu information strings
225g_szCapacity: db "Capacity : %s",NULL
226g_szCapacityNum: db "%5-u.%u %ciB",NULL
227g_szInformation: db "%s",LF,CR
228 db "Addr. ",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL,"IRQ",SINGLE_VERTICAL,"Reset",LF,CR
229 db "%s",SINGLE_VERTICAL,"%5-u",SINGLE_VERTICAL,"%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x",NULL
230
231%endif ; MODULE_BOOT_MENU
232
233
234;------------------------------------------------------------------------------------------
235;
236; Tables for StringsCompress.pl
237;
238; Items can be added and removed from this table as needed, with the following rules:
239; * Formats follow the special characters. But other than that, order makes no difference.
240; * Some of the formats require "even" and "odd" numbering. Even tells the code that
241; it is a "number-" format, otherwise it doesn't interpret a number first. The easiest
242; way to maintain this is to move one of the "n/a" items to/from the front of the format
243; list to maintain the even/odd.
244; * Values do not need to remain consistent across versions. This table is only used
245; internally to this file.
246; * There can only be 32 of these (0-31).
247; * Keeping the list short is good - this translates to a table in the compressed version.
248; An error will be reported if a character or format is no longer being used by any
249; strings above.
250; * Please keep items sequential for ease of further editing.
251;
252;$translate{ord(' ')} = 0;
253;$translate{172} = 1; # ONE_QUARTER
254;$translate{171} = 2; # ONE_HALF
255;$translate{179} = 3; # SINGLE_VERTICAL
256;$translate{175} = 4; # ANGLE_QUOTE_RIGHT
257;$translate{ord('!')} = 5;
258;$translate{ord('"')} = 6;
259;$translate{ord(',')} = 7;
260;$translate{ord('-')} = 8;
261;$translate{ord('.')} = 9;
262;$translate{ord('/')} = 10;
263;$translate{ord('1')} = 11;
264;$translate{ord('2')} = 12;
265;$translate{ord('3')} = 13;
266;$translate{ord('5')} = 14;
267;$translate{ord('6')} = 15;
268;$translate{ord('8')} = 16;
269;$translate{200} = 17; # DOUBLE_BOTTOM_LEFT_CORNER
270;$translate{181} = 18; # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
271;$translate{ord('0')} = 19;
272;
273; Formats begin immediately after the last Translated character (they are in the same table)
274;
275;$format_begin = 20;
276;
277;$format{"2-I"} = 20; # must be even
278;$format{"u"} = 21; # must be odd
279;$format{"5-u"} = 22; # must be even
280;$format{"x"} = 23; # must be odd
281;$format{"5-x"} = 24; # must be even
282;$format{"nl"} = 25; # n/a
283;$format{"2-u"} = 26; # must be even
284;$format{"A"} = 27; # n/a
285;$format{"c"} = 28; # n/a
286;$format{"s"} = 29; # n/a, normal string from DS
287;$format{"z"} = 30; # n/a, boot string from BDA
288;
289; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
290;
291; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
292; letters. If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
293; front end.
294;
295;$normal_base = 0x3a;
296;
297; End of StringsCompress.pl information
298;
299;------------------------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.