source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Menus/HotkeyBar.asm@ 592

Last change on this file since 592 was 592, checked in by Krister Nordvall, 7 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 13.4 KB
RevLine 
[392]1; Project name : XTIDE Universal BIOS
2; Description : Hotkey Bar related functions.
3
4;
[399]5; XTIDE Universal BIOS and Associated Tools
[526]6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[392]7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
[399]12;
[392]13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
[399]17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
[392]19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
[528]24; Scans key presses and draws any hotkey changes.
25;
[392]26; HotkeyBar_UpdateDuringDriveDetection
27; Parameters:
28; DS: RAMVARS segment
29; ES: BDA segment (zero)
30; Returns:
31; Nothing
32; Corrupts registers:
33; AX, CX, DX, SI, DI
34;--------------------------------------------------------------------
35HotkeyBar_UpdateDuringDriveDetection:
[528]36 call ScanHotkeysFromKeyBufferAndStoreToBootvars
[392]37 ; Fall to HotkeyBar_DrawToTopOfScreen
[505]38
39
[392]40;--------------------------------------------------------------------
41; HotkeyBar_DrawToTopOfScreen
42; Parameters:
43; DS: RAMVARS segment
44; ES: BDA segment (zero)
45; Returns:
46; Nothing
47; Corrupts registers:
48; AX, CX, DX, SI, DI
49;--------------------------------------------------------------------
50HotkeyBar_DrawToTopOfScreen:
51 ; Store current screen coordinates to be restored
52 ; when Hotkey Bar is rendered
53 call DetectPrint_GetSoftwareCoordinatesToAX
54 push ax
55
56 call MoveCursorToScreenTopLeftCorner
57 ; Fall to .PrintFloppyDriveHotkeys
58
59;--------------------------------------------------------------------
60; .PrintFloppyDriveHotkeys
61; Parameters:
62; DS: RAMVARS segment
63; ES: BDA segment (zero)
64; Returns:
65; Nothing
66; Corrupts registers:
67; AX, CX, DX, SI, DI
68;--------------------------------------------------------------------
69.PrintFloppyDriveHotkeys:
70 call FloppyDrive_GetCountToAX
[568]71 xchg cx, ax ; Any Floppy Drives?
72 jcxz .SkipFloppyDriveHotkeys
[392]73
[492]74 mov ax, (ANGLE_QUOTE_RIGHT << 8) | DEFAULT_FLOPPY_DRIVE_LETTER
[500]75 mov cl, [es:BOOTVARS.hotkeyVars+HOTKEYVARS.bFddLetter]
[492]76 mov di, g_szFDD
[392]77 call FormatDriveHotkeyString
78
79.SkipFloppyDriveHotkeys:
80 ; Fall to .PrintHardDriveHotkeys
81
82;--------------------------------------------------------------------
83; .PrintHardDriveHotkeys
84; Parameters:
85; DS: RAMVARS segment
86; ES: BDA segment (zero)
87; Returns:
88; Nothing
89; Corrupts registers:
90; AX, CX, DX, SI, DI
91;--------------------------------------------------------------------
[547]92 call BootVars_GetLetterForFirstHardDriveToAX
[392]93 mov ah, ANGLE_QUOTE_RIGHT
[500]94 mov cl, [es:BOOTVARS.hotkeyVars+HOTKEYVARS.bHddLetter]
[492]95 mov di, g_szHDD
[392]96 call FormatDriveHotkeyString
97 ; Fall to .PrintBootMenuHotkey
98
99;--------------------------------------------------------------------
100; .PrintBootMenuHotkey
101; Parameters:
102; ES: BDA segment (zero)
103; Returns:
104; Nothing
105; Corrupts registers:
106; AX, CX, DX, SI, DI
107;--------------------------------------------------------------------
108.PrintBootMenuHotkey:
109%ifdef MODULE_BOOT_MENU
[492]110 mov ax, BOOT_MENU_HOTKEY_SCANCODE | ('2' << 8)
111 mov di, g_szBootMenu
[392]112 call FormatFunctionHotkeyString
113%endif
[492]114 ; Fall to .PrintComDetectHotkey
[392]115
116;--------------------------------------------------------------------
[492]117; .PrintComDetectHotkey
118; Parameters:
119; ES: BDA segment (zero)
120; Returns:
121; Nothing
122; Corrupts registers:
123; AX, CX, DX, SI, DI
124;--------------------------------------------------------------------
125.PrintComDetectHotkey:
126%ifdef MODULE_SERIAL
127 mov ax, COM_DETECT_HOTKEY_SCANCODE | ('6' << 8)
128 mov di, g_szHotComDetect
129 call FormatFunctionHotkeyString
130%endif
[505]131 ; Fall to .PrintRomBootHotkey
[492]132
133;--------------------------------------------------------------------
[392]134; .PrintRomBootHotkey
135; Parameters:
136; ES: BDA segment (zero)
137; Returns:
138; Nothing
139; Corrupts registers:
140; AX, CX, DX, SI, DI
141;--------------------------------------------------------------------
142.PrintRomBootHotkey:
[492]143 mov ax, ROM_BOOT_HOTKEY_SCANCODE | ('8' << 8)
144 mov di, g_szRomBoot
[392]145 call FormatFunctionHotkeyString
146 ; Fall to .EndHotkeyBarRendering
147
148;--------------------------------------------------------------------
149; .EndHotkeyBarRendering
150; Parameters:
151; Stack: Screen coordinates before drawing Hotkey Bar
152; Returns:
153; Nothing
154; Corrupts registers:
155; AX, CX, DI
156;--------------------------------------------------------------------
157.EndHotkeyBarRendering:
158 call HotkeyBar_ClearRestOfTopRow
159 pop ax
160 jmp SHORT HotkeyBar_RestoreCursorCoordinatesFromAX
161
162
163;--------------------------------------------------------------------
164; HotkeyBar_ClearRestOfTopRow
165; Parameters:
166; Nothing
167; Returns:
168; Nothing
169; Corrupts registers:
170; AX, CX, DI
171;--------------------------------------------------------------------
172HotkeyBar_ClearRestOfTopRow:
[505]173 CALL_DISPLAY_LIBRARY GetColumnsToALandRowsToAH
[392]174 eMOVZX cx, al
[505]175 CALL_DISPLAY_LIBRARY GetSoftwareCoordinatesToAX
[392]176 sub cl, al
177 mov al, ' '
[505]178 JMP_DISPLAY_LIBRARY PrintRepeatedCharacterFromALwithCountInCX
[392]179
180
181;--------------------------------------------------------------------
182; FormatDriveHotkeyString
183; Parameters:
184; CL: Drive letter hotkey from BOOTVARS
[492]185; AL: First character for drive key string
186; AH: Second character for drive key string (ANGLE_QUOTE_RIGHT)
[392]187; SI: Offset to hotkey description string
188; ES: BDA segment (zero)
189; Returns:
190; Nothing
191; Corrupts registers:
192; AX, CX, DX, SI, DI
193;--------------------------------------------------------------------
[492]194;; No work to do before going into FormatFunctionHotkeyString
195FormatDriveHotkeyString equ GetNonSelectedHotkeyDescriptionAttributeToDX
[392]196
197;--------------------------------------------------------------------
198; FormatFunctionHotkeyString
199; Parameters:
[492]200; AL: Scancode of function key, to know which if any to show as selected
201; Later replaced with an 'F' for the call to the output routine
202; AH: Second character for drive key string
[392]203; SI: Offset to hotkey description string
204; ES: BDA segment (zero)
205; Returns:
206; Nothing
207; Corrupts registers:
208; AX, CX, DX, SI, DI
209;--------------------------------------------------------------------
210FormatFunctionHotkeyString:
[492]211 xor cx, cx ; Null character, eaten in output routines
[392]212
[492]213 cmp [es:BOOTVARS.hotkeyVars+HOTKEYVARS.bScancode], al
214 mov al, 'F' ; Replace scancode with character for output
[392]215
216%ifdef MODULE_BOOT_MENU
[492]217
[392]218 mov si, ATTRIBUTE_CHARS.cHurryTimeout ; Selected hotkey
[505]219 je SHORT GetDescriptionAttributeToDX ; From compare with bScancode above
[392]220
221GetNonSelectedHotkeyDescriptionAttributeToDX:
222 mov si, ATTRIBUTE_CHARS.cHighlightedItem ; Unselected hotkey
223
224 ; Display Library should not be called like this
225GetDescriptionAttributeToDX:
[492]226 xchg dx, ax
[392]227 call MenuAttribute_GetToAXfromTypeInSI
228 xchg dx, ax ; DX = Description attribute
[505]229 ;; fall through to PushHotkeyParamsAndFormat
[392]230
231
[500]232%else ; if no MODULE_BOOT_MENU - No boot menu so use simpler attributes
233
[410]234 mov dx, (COLOR_ATTRIBUTE(COLOR_YELLOW, COLOR_CYAN) << 8) | MONO_REVERSE_BLINK
[505]235 je SHORT SelectAttributeFromDHorDLbasedOnVideoMode ; From compare with bScancode above
[392]236
237GetNonSelectedHotkeyDescriptionAttributeToDX:
[410]238 mov dx, (COLOR_ATTRIBUTE(COLOR_BLACK, COLOR_CYAN) << 8) | MONO_REVERSE
[492]239
[410]240SelectAttributeFromDHorDLbasedOnVideoMode:
[500]241 mov ch, [es:BDA.bVidMode] ; We only need to preserve CL
242 shr ch, 1
[410]243 jnc SHORT .AttributeLoadedToDL ; Black & White modes
[500]244 shr ch, 1
[410]245 jnz SHORT .AttributeLoadedToDL ; MDA
246 mov dl, dh
247.AttributeLoadedToDL:
[505]248 ;; fall through to PushHotkeyParamsAndFormat
[410]249
[492]250%endif ; MODULE_BOOT_MENU
[392]251
252
253;--------------------------------------------------------------------
254; PushHotkeyParamsAndFormat
255; Parameters:
[500]256; AL: First character
257; AH: Second character
[392]258; DX: Description Attribute
259; CX: Description string parameter
[492]260; CS:DI: Description string
[392]261; Returns:
262; Nothing
263; Corrupts registers:
264; AX, SI, DI
265;--------------------------------------------------------------------
266PushHotkeyParamsAndFormat:
267 push bp
268 mov bp, sp
269
[492]270 mov si, MONO_BRIGHT
[392]271
[492]272 push si ; Key attribute
273 push ax ; First Character
274 mov al, ah
275 push ax ; Second Character
276
[392]277 push dx ; Description attribute
[492]278 push di ; Description string
[392]279 push cx ; Description string parameter
[505]280
[492]281 push si ; Key attribute for last space
[392]282
283 mov si, g_szHotkey
284 jmp DetectPrint_FormatCSSIfromParamsInSSBP
285
286
287;--------------------------------------------------------------------
288; MoveCursorToScreenTopLeftCorner
289; Parameters:
290; Nothing
291; Returns:
292; Nothing
293; Corrupts registers:
294; AX, DI
295;--------------------------------------------------------------------
296MoveCursorToScreenTopLeftCorner:
297 xor ax, ax ; Top left corner (0, 0)
298 ; Fall to HotkeyBar_RestoreCursorCoordinatesFromAX
299
300
301;--------------------------------------------------------------------
302; HotkeyBar_RestoreCursorCoordinatesFromAX
303; Parameters:
304; Nothing
305; Returns:
306; Nothing
307; Corrupts registers:
308; AX, DI
309;--------------------------------------------------------------------
310HotkeyBar_RestoreCursorCoordinatesFromAX:
[505]311 JMP_DISPLAY_LIBRARY SetCursorCoordinatesFromAX
[392]312
313
314;--------------------------------------------------------------------
[528]315; HotkeyBar_StoreHotkeyToBootvarsForDriveNumberInDL
[395]316; Parameters:
317; DS: RAMVARS segment
318; ES: BDA segment (zero)
[528]319; DL: Drive Number
320; Returns:
321; Nothing
322; Corrupts registers:
323; AX, CX, DL, DI
324;--------------------------------------------------------------------
325HotkeyBar_StoreHotkeyToBootvarsForDriveNumberInDL:
326 call DriveXlate_ConvertDriveNumberFromDLtoDriveLetter
327 ; Fall to StoreHotkeyToBootvarsForDriveLetterInDL
328
329
330;--------------------------------------------------------------------
331; StoreHotkeyToBootvarsForDriveLetterInDL
332; Parameters:
333; DS: RAMVARS segment
334; ES: BDA segment (zero)
[395]335; DL: Drive Letter ('A'...)
336; Returns:
337; Nothing
338; Corrupts registers:
339; AX, CX, DI
340;--------------------------------------------------------------------
[528]341StoreHotkeyToBootvarsForDriveLetterInDL:
[395]342 eMOVZX ax, dl
[505]343 or al, 32 ; Upper case drive letter to lower case keystroke
[395]344 jmp SHORT HotkeyBar_StoreHotkeyToBootvarsIfValidKeystrokeInAX
345
346
347;--------------------------------------------------------------------
[528]348; ScanHotkeysFromKeyBufferAndStoreToBootvars
[392]349; Parameters:
350; DS: RAMVARS segment
351; ES: BDA segment (zero)
352; Returns:
[492]353; AL: Last scancode value
[392]354; Corrupts registers:
[492]355; AH, CX
[392]356;--------------------------------------------------------------------
[528]357ScanHotkeysFromKeyBufferAndStoreToBootvars:
[392]358 call Keyboard_GetKeystrokeToAX
359 jz SHORT NoHotkeyToProcess
360
[528]361 ; Prepare to read another key from buffer
362 ePUSH_T cx, ScanHotkeysFromKeyBufferAndStoreToBootvars
[392]363 ; Fall to HotkeyBar_StoreHotkeyToBootvarsIfValidKeystrokeInAX
364
365
366;--------------------------------------------------------------------
367; HotkeyBar_StoreHotkeyToBootvarsIfValidKeystrokeInAX
368; Parameters:
369; AL: Hotkey ASCII code
370; AH: Hotkey Scancode
371; DS: RAMVARS segment
372; ES: BDA segment (zero)
373; Returns:
[567]374; AL: Last scancode seen
[528]375; CF: Set if valid hotkey in AL
376; Clear if scancode in AL is not for any hotkey
[392]377; Corrupts registers:
[492]378; AH, CX, DI
[392]379;--------------------------------------------------------------------
380HotkeyBar_StoreHotkeyToBootvarsIfValidKeystrokeInAX:
[492]381 mov di, BOOTVARS.hotkeyVars+HOTKEYVARS.bScancode
[392]382
[492]383 ; All scancodes are saved, even if it wasn't a drive letter,
384 ; which also covers our function key case. Invalid function keys
[505]385 ; will not do anything (won't be printed, won't be accepted as input)
[492]386 mov [es:di], ah
[505]387
[392]388 ; Drive letter hotkeys remaining, allow 'a' to 'z'
389 call Char_IsLowerCaseLetterInAL
[492]390 jnc SHORT .KeystrokeIsNotValidDriveLetter
[505]391 and al, ~32 ; We want to print upper case letters
[392]392
393 ; Clear HD First flag to assume Floppy Drive hotkey
[492]394 dec di
[392]395 and BYTE [es:di], ~FLG_HOTKEY_HD_FIRST
396
397 ; Determine if Floppy or Hard Drive hotkey
[505]398 xchg cx, ax
[547]399 call BootVars_GetLetterForFirstHardDriveToAX
[392]400 cmp cl, al
401 jb SHORT .StoreDriveLetter ; Store Floppy Drive letter
402
403 ; Store Hard Drive letter
404 or BYTE [es:di], FLG_HOTKEY_HD_FIRST
405
406.StoreDriveLetter:
[505]407 sbb di, BYTE 1 ; Sub CF if Floppy Drive
[392]408 xchg ax, cx
[592]409 stosb
[528]410 stc ; Valid hotkey scancode returned in AL
[392]411
[505]412.KeystrokeIsNotValidDriveLetter:
[392]413NoHotkeyToProcess:
[492]414 mov al, [es:BOOTVARS.hotkeyVars+HOTKEYVARS.bScancode]
[392]415 ret
416
[528]417
[392]418;--------------------------------------------------------------------
[492]419; HotkeyBar_GetBootDriveNumbersToDX
[392]420; Parameters:
421; DS: RAMVARS segment
422; ES: BDA segment (zero)
423; Returns:
[492]424; DX: Drives selected as boot device, DL is primary
[392]425; Corrupts registers:
[492]426; AX
[392]427;--------------------------------------------------------------------
[492]428HotkeyBar_GetBootDriveNumbersToDX:
[500]429 mov dx, [es:BOOTVARS.hotkeyVars+HOTKEYVARS.wFddAndHddLetters]
[505]430 test BYTE [es:BOOTVARS.hotkeyVars+HOTKEYVARS.bFlags], FLG_HOTKEY_HD_FIRST
[492]431 jnz .noflip
[392]432 xchg dl, dh
[505]433.noflip:
[492]434 call DriveXlate_ConvertDriveLetterInDLtoDriveNumber
435 xchg dl, dh
[505]436 ; Fall to HotkeyBar_FallThroughTo_DriveXlate_ConvertDriveLetterInDLtoDriveNumber
[392]437
[505]438HotkeyBar_FallThroughTo_DriveXlate_ConvertDriveLetterInDLtoDriveNumber:
439
Note: See TracBrowser for help on using the repository browser.