[88] | 1 | ; Project name : XTIDE Universal BIOS |
---|
[3] | 2 | ; Description : Functions for printing drive detection strings. |
---|
| 3 | |
---|
| 4 | ; Section containing code |
---|
| 5 | SECTION .text |
---|
| 6 | |
---|
| 7 | ;-------------------------------------------------------------------- |
---|
| 8 | ; Prints BIOS name and segment address where it is found. |
---|
| 9 | ; |
---|
| 10 | ; DetectPrint_RomFoundAtSegment |
---|
| 11 | ; Parameters: |
---|
| 12 | ; Nothing |
---|
| 13 | ; Returns: |
---|
| 14 | ; Nothing |
---|
| 15 | ; Corrupts registers: |
---|
[120] | 16 | ; AX, SI, DI |
---|
[3] | 17 | ;-------------------------------------------------------------------- |
---|
| 18 | DetectPrint_RomFoundAtSegment: |
---|
[88] | 19 | push bp |
---|
[97] | 20 | mov bp, sp |
---|
[3] | 21 | mov si, g_szRomAt |
---|
[88] | 22 | ePUSH_T ax, ROMVARS.szTitle ; Bios title string |
---|
| 23 | push cs ; BIOS segment |
---|
[242] | 24 | |
---|
| 25 | DetectPrint_BootMenuPrint_FormatCSSIfromParamsInSSBP_Relay: |
---|
[88] | 26 | jmp BootMenuPrint_FormatCSSIfromParamsInSSBP |
---|
[3] | 27 | |
---|
| 28 | |
---|
| 29 | ;-------------------------------------------------------------------- |
---|
[97] | 30 | ; DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP |
---|
[3] | 31 | ; Parameters: |
---|
[233] | 32 | ; CS:CX: Ptr to "Master" or "Slave" string |
---|
[3] | 33 | ; CS:BP: Ptr to IDEVARS |
---|
[242] | 34 | ; SI: Ptr to template string |
---|
[3] | 35 | ; Returns: |
---|
| 36 | ; Nothing |
---|
| 37 | ; Corrupts registers: |
---|
[196] | 38 | ; AX, SI, DI, CX |
---|
[3] | 39 | ;-------------------------------------------------------------------- |
---|
[97] | 40 | DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP: |
---|
[233] | 41 | |
---|
| 42 | mov ax, [cs:bp+IDEVARS.wPort] ; for IDE: AX=port address, DH=.bDevice |
---|
| 43 | mov dx, [cs:bp+IDEVARS.bDevice-1] ; for Serial: AL=port address>>2, AH=baud rate |
---|
| 44 | ; DL=COM number character, DH=.bDevice |
---|
[262] | 45 | |
---|
| 46 | mov si, g_szDetectOuter ; Load SI with default wrapper string "IDE %s at %s: " |
---|
| 47 | |
---|
[242] | 48 | push bp ; setup stack for call to |
---|
[233] | 49 | mov bp, sp ; BootMenuPrint_FormatCSSIfromParamsInSSBP |
---|
| 50 | |
---|
| 51 | push cx ; Push "Master" or "Slave" |
---|
[242] | 52 | |
---|
[233] | 53 | mov cl, (g_szDetectPort-$$) & 0xff ; Setup print string for standard IDE |
---|
| 54 | ; Note that we modify only the low order bits of CX a lot here, |
---|
| 55 | ; saving code space rather than reloading CX completely. |
---|
| 56 | ; This optimization requires that all the g_szDetect* strings are |
---|
| 57 | ; on the same 256 byte page, which is checked in strings.asm. |
---|
[3] | 58 | |
---|
[277] | 59 | %ifdef MODULE_SERIAL |
---|
[244] | 60 | cmp dh, DEVICE_SERIAL_PORT ; Check if this is a serial device |
---|
[233] | 61 | |
---|
[244] | 62 | jnz .pushAndPrint ; CX = string to print, AX = port address, DX won't be used |
---|
[233] | 63 | |
---|
| 64 | mov cl, (g_szDetectCOM-$$) & 0xff ; Setup print string for COM ports |
---|
| 65 | push cx ; And push now. We use the fact that format strings can contain |
---|
| 66 | ; themselves format strings. |
---|
| 67 | |
---|
| 68 | push dx ; Push COM number character |
---|
[242] | 69 | ; If the string is going to be "Auto", we will push a NULL (zero) |
---|
| 70 | ; here for the COM port number, which will be eaten by the |
---|
| 71 | ; print routine (DisplayPrint_CharacterFromAL), resulting in |
---|
[235] | 72 | ; just "COM" being printed without a character after it. |
---|
[242] | 73 | |
---|
[233] | 74 | mov cl, (g_szDetectCOMAuto-$$) & 0xff ; Setup secondary print string for "Auto" |
---|
[242] | 75 | |
---|
[244] | 76 | test dl, dl ; Check if serial port "Auto" |
---|
[262] | 77 | jz .pushAndPrintSerial ; CX = string to print, AX and DX won't be used |
---|
[242] | 78 | |
---|
[233] | 79 | mov cl, (g_szDetectCOMLarge-$$) & 0xff ; Setup secondary print string for "COMn/xx.yK" |
---|
[3] | 80 | |
---|
[233] | 81 | mov al,ah ; baud rate divisor to AL |
---|
| 82 | cbw ; clear AH, AL will always be less than 128 |
---|
| 83 | xchg si,ax ; move AX to SI for divide |
---|
[242] | 84 | mov ax,1152 ; baud rate to display is 115200/divisor, the "00" is handled |
---|
[233] | 85 | ; in the print strings |
---|
[242] | 86 | cwd ; clear top 16-bits of dividend |
---|
[233] | 87 | div si ; and divide... Now AX = baud rate/100, DX = 0 (always a clean divide) |
---|
[242] | 88 | |
---|
[233] | 89 | mov si,10 ; Now separate the whole portion from the fractional for "K" display |
---|
| 90 | div si ; and divide... Now AX = baud rate/1000, DX = low order digit |
---|
[242] | 91 | |
---|
| 92 | cmp ax,si ; < 10: "2400", "9600", etc.; >= 10: "19.2K", "38.4K", etc. |
---|
[262] | 93 | jae .pushAndPrintSerial |
---|
[196] | 94 | |
---|
[233] | 95 | mov cl, (g_szDetectCOMSmall-$$) & 0xff ; Setup secondary print string for "COMn/XXy00" |
---|
[242] | 96 | |
---|
[262] | 97 | .pushAndPrintSerial: |
---|
[277] | 98 | mov si, g_szDetectOuterSerial ; Finally load SI with wrapper string "Serial %s on %s: " |
---|
[262] | 99 | |
---|
[242] | 100 | .pushAndPrint: |
---|
[277] | 101 | %endif |
---|
| 102 | |
---|
[233] | 103 | push cx ; Push print string |
---|
| 104 | push ax ; Push high order digits, or port address, or N/A |
---|
| 105 | push dx ; Push low order digit, or N/A |
---|
| 106 | |
---|
[242] | 107 | jmp short DetectPrint_BootMenuPrint_FormatCSSIfromParamsInSSBP_Relay |
---|
[196] | 108 | |
---|
| 109 | |
---|
[3] | 110 | ;-------------------------------------------------------------------- |
---|
[98] | 111 | ; DetectPrint_DriveNameFromBootnfoInESBX |
---|
[3] | 112 | ; Parameters: |
---|
[254] | 113 | ; ES:BX: Ptr to BOOTMENUINFO (if drive found) |
---|
[3] | 114 | ; Returns: |
---|
| 115 | ; Nothing |
---|
| 116 | ; Corrupts registers: |
---|
[88] | 117 | ; AX, SI |
---|
[3] | 118 | ;-------------------------------------------------------------------- |
---|
[98] | 119 | DetectPrint_DriveNameFromBootnfoInESBX: |
---|
[88] | 120 | push di |
---|
| 121 | push bx |
---|
| 122 | |
---|
[254] | 123 | lea si, [bx+BOOTMENUINFO.szDrvName] |
---|
[88] | 124 | mov bx, es |
---|
| 125 | CALL_DISPLAY_LIBRARY PrintNullTerminatedStringFromBXSI |
---|
| 126 | CALL_DISPLAY_LIBRARY PrintNewlineCharacters |
---|
| 127 | |
---|
| 128 | pop bx |
---|
| 129 | pop di |
---|
| 130 | ret |
---|