source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm @ 505

Last change on this file since 505 was 505, checked in by krille_n_@…, 11 years ago

Changes:

  • Reverted the changes to MenuEvents.inc done in r492 since they broke the F1 key function in XTIDECFG.
  • Added a tail-call optimized variant of the CALL_DISPLAY_LIBRARY macro (JMP_DISPLAY_LIBRARY).
  • Put a block size limit in AH1Eh_ChangeXTCFmodeBasedOnControlRegisterInAL. I think it's needed but if not, it's easy to remove.
  • Other optimizations and fixes.
File size: 10.1 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for detecting drive for the BIOS.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Detects all IDE hard disks to be controlled by this BIOS.
25;
26; DetectDrives_FromAllIDEControllers
27;   Parameters:
28;       DS:     RAMVARS segment
29;       ES:     BDA segment (zero)
30;   Returns:
31;       Nothing
32;   Corrupts registers:
33;       All (not segments)
34;--------------------------------------------------------------------
35DetectDrives_FromAllIDEControllers:
36    call    RamVars_GetIdeControllerCountToCX
37    mov     bp, ROMVARS.ideVars0            ; CS:BP now points to first IDEVARS
38
39.DriveDetectLoop:                           ; Loop through IDEVARS
40    push    cx
41
42    mov     cx, g_szDetectMaster
43    mov     bh, MASK_DRVNHEAD_SET                               ; Select Master drive
44    call    StartDetectionWithDriveSelectByteInBHandStringInCX  ; Detect and create DPT + BOOTNFO
45
46    mov     cx, g_szDetectSlave
47    mov     bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
48    call    StartDetectionWithDriveSelectByteInBHandStringInCX
49
50%ifdef MODULE_HOTKEYS
51    call    HotkeyBar_ScanHotkeysFromKeyBufferAndStoreToBootvars        ; Done here while CX is still protected
52%endif
53
54    pop     cx
55
56    add     bp, BYTE IDEVARS_size           ; Point to next IDEVARS
57
58%ifdef MODULE_SERIAL
59    jcxz    .AddHardDisks                   ; Set to zero on .ideVarsSerialAuto iteration (if any)
60%endif
61    loop    .DriveDetectLoop
62
63%ifdef MODULE_SERIAL
64;----------------------------------------------------------------------
65;
66; if serial drive detected, do not scan (avoids duplicate drives and isn't needed - we already have a connection)
67;
68    call    FindDPT_ToDSDIforSerialDevice   ; does not modify AX
69    jnc     .AddHardDisks
70
71    mov     bp, ROMVARS.ideVarsSerialAuto   ; Point to our special IDEVARS structure, just for serial scans
72
73%ifdef MODULE_HOTKEYS
74    cmp     al, COM_DETECT_HOTKEY_SCANCODE  ; Set by last call to HotkeyBar_UpdateDuringDriveDetection above
75    je      .DriveDetectLoop
76%endif
77
78    mov     al,[cs:ROMVARS.wFlags]          ; Configurator set to always scan?
79    or      al,[es:BDA.bKBFlgs1]            ; Or, did the user hold down the ALT key?
80    and     al,8                            ; 8 = alt key depressed, same as FLG_ROMVARS_SERIAL_ALWAYSDETECT
81    jnz     .DriveDetectLoop
82%endif
83
84.AddHardDisks:
85;----------------------------------------------------------------------
86;
87; Add in hard disks to BDA, finalize our Count and First variables
88;
89; Note that we perform the add to bHDCount and store bFirstDrv even if the count is zero.
90; This is done because we use the value of .bFirstDrv to know how many drives were in the system
91; at the time of boot, and to return that number on int13h/8h calls.  Because the count is zero,
92; FindDPT_ForDriveNumber will not find any drives that are ours.
93;
94    mov     cx, [RAMVARS.wDrvCntAndFlopCnt]     ; Our count of hard disks
95
96    mov     al, [es:BDA.bHDCount]
97    add     cl, al                      ; Add our drives to the system count
98    mov     [es:BDA.bHDCount], cl
99    or      al, 80h                     ; Or in hard disk flag
100    mov     [RAMVARS.bFirstDrv], al     ; Store first drive number
101
102.AddFloppies:
103%ifdef MODULE_SERIAL_FLOPPY
104;----------------------------------------------------------------------
105;
106; Add in any emulated serial floppy drives, finalize our packed Count and First variables
107;
108    dec     ch
109    mov     al, ch
110    js      .NoFloppies                     ; if no drives are present, we store 0ffh
111
112    call    FloppyDrive_GetCountFromBIOS_or_BDA
113
114    push    ax
115
116    add     al, ch                          ; Add our drives to existing drive count
117    cmp     al, 3                           ; For BDA, max out at 4 drives (ours is zero based)
118    jb      .MaxBDAFloppiesExceeded
119    mov     al, 3
120.MaxBDAFloppiesExceeded:
121    eROR_IM al, 2                           ; move to bits 6-7
122    inc     ax                              ; low order bit, indicating floppy drive exists
123
124    mov     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
125    and     ah, 03eh                        ; Mask off drive number and drives present bit
126    or      al, ah                          ; Or in new values
127    mov     [es:BDA.wEquipment], al         ; and store
128
129    mov     al, 1eh                         ; BDA pointer to Floppy DPT
130    mov     si, AH8h_FloppyDPT
131    call    Interrupts_InstallHandlerToVectorInALFromCSSI
132
133    pop     ax
134
135    shr     ch, 1                           ; number of drives, 1 or 2 only, to CF flag (clear=1, set=2)
136    rcl     al, 1                           ; starting drive number in upper 7 bits, number of drives in low bit
137.NoFloppies:
138    mov     [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], al
139%endif
140
141    ret
142
143%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
144    %if FLG_ROMVARS_SERIAL_SCANDETECT != 8
145        %error "DetectDrives is currently coded to assume that FLG_ROMVARS_SERIAL_SCANDETECT is the same bit as the ALT key code in the BDA.  Changes in the code will be needed if these values are no longer the same."
146    %endif
147%endif
148
149
150;--------------------------------------------------------------------
151; StartDetectionWithDriveSelectByteInBHandStringInCX
152;   Parameters:
153;       BH:     Drive Select byte for Drive and Head Register
154;       CX:     Offset to "Master" or "Slave" string
155;       CS:BP:  Ptr to IDEVARS for the drive
156;       DS:     RAMVARS segment
157;       ES:     Zero (BDA segment)
158;   Returns:
159;       None
160;   Corrupts registers:
161;       AX, BL, CX, DX, SI, DI
162;--------------------------------------------------------------------
163StartDetectionWithDriveSelectByteInBHandStringInCX:
164%ifdef MODULE_8BIT_IDE_ADVANCED
165    ; Autodetect port for XT-CF
166    call    DetectDrives_DoesIdevarsInCSBPbelongToXTCF
167    jne     SHORT .SkipXTCFportDetection
168
169    ; XT-CF do not support slave drives so skip detection
170    test    bh, FLG_DRVNHEAD_DRV
171    jnz     SHORT NoSlaveDriveAvailable
172
173    ; XT-CF do not support slave drives so we can safely update port
174    ; for next drive (another XT-CF card on same system)
175.DetectNextPort:
176    mov     dx, [es:BOOTVARS.wNextXTCFportToScan]
177    xor     dl, 40h
178    jnz     SHORT .StoreNextXTCFportToScan
179    inc     dh
180    cmp     dh, XTCF_BASE_PORT_4 >> 8
181    ja      SHORT .SkipXTCFportDetection        ; XT-CF not found from any port
182.StoreNextXTCFportToScan:
183    mov     [es:BOOTVARS.wNextXTCFportToScan], dx
184
185    call    AH1Eh_DetectXTCFwithBasePortInDX
186    jc      SHORT .DetectNextPort               ; XT-CF not found from this port
187
188    ; We now have autodetected port in DX
189    push    dx
190    xchg    ax, dx                              ; Port to print in AX
191    call    DetectPrint_StartDetectWithAutodetectedBasePortInAXandIdeVarsInCSBP
192    jmp     SHORT .DriveDetectionStringPrintedOnScreen
193
194    ; Print detect string for devices that do not support autodetection
195.SkipXTCFportDetection:
196    push    dx
197%endif ; MODULE_8BIT_IDE_ADVANCED
198
199    call    DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
200.DriveDetectionStringPrintedOnScreen:
201%ifdef MODULE_HOTKEYS
202    call    HotkeyBar_UpdateDuringDriveDetection
203%endif
204
205%ifdef MODULE_8BIT_IDE_ADVANCED
206    pop     dx
207%endif
208    ; Fall to .ReadAtaInfoFromHardDisk
209
210
211;--------------------------------------------------------------------
212; .ReadAtaInfoFromHardDisk
213;   Parameters:
214;       BH:     Drive Select byte for Drive and Head Register
215;       DX:     Autodetected port (for devices that support autodetection)
216;       CS:BP:  Ptr to IDEVARS for the drive
217;       DS:     RAMVARS segment
218;       ES:     Zero (BDA segment)
219;   Returns:
220;       CF:     Cleared if ATA-information read successfully
221;               Set if any error
222;   Corrupts registers:
223;       AX, BL, CX, DX, SI, DI
224;--------------------------------------------------------------------
225.ReadAtaInfoFromHardDisk:
226    mov     si, BOOTVARS.rgbAtaInfo     ; ES:SI now points to ATA info location
227    push    es
228    push    si
229    push    dx
230    push    bx
231    call    Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
232    pop     bx
233    pop     dx
234    pop     si
235    pop     es
236    jnc     SHORT CreateBiosTablesForHardDisk
237    ; Fall to .ReadAtapiInfoFromDrive
238
239.ReadAtapiInfoFromDrive:                ; Not yet implemented
240    ;call   ReadAtapiInfoFromDrive      ; Assume CD-ROM
241    ;jnc    SHORT _CreateBiosTablesForCDROM
242
243    ;jmp    short DetectDrives_DriveNotFound
244;;; fall-through instead of previous jmp instruction
245;--------------------------------------------------------------------
246; DetectDrives_DriveNotFound
247;   Parameters:
248;       Nothing
249;   Returns:
250;       CF:     Set (from DetectPrint_NullTerminatedStringFromCSSIandSetCF)
251;   Corrupts registers:
252;       AX, SI
253;--------------------------------------------------------------------
254DetectDrives_DriveNotFound:
255    mov     si, g_szNotFound
256    jmp     DetectPrint_NullTerminatedStringFromCSSIandSetCF
257
258
259;--------------------------------------------------------------------
260; CreateBiosTablesForHardDisk
261;   Parameters:
262;       BH:     Drive Select byte for Drive and Head Register
263;       DX:     Autodetected port (for devices that support autodetection)
264;       CS:BP:  Ptr to IDEVARS for the drive
265;       ES:SI   Ptr to ATA information for the drive
266;       DS:     RAMVARS segment
267;       ES:     BDA segment
268;   Returns:
269;       Nothing
270;   Corrupts registers:
271;       AX, BX, CX, DX, SI, DI
272;--------------------------------------------------------------------
273CreateBiosTablesForHardDisk:
274    push    bx
275    call    AtaID_VerifyFromESSI
276    pop     bx
277    jc      SHORT DetectDrives_DriveNotFound
278    call    CreateDPT_FromAtaInformation
279    jc      SHORT DetectDrives_DriveNotFound
280    call    DriveDetectInfo_CreateForHardDisk
281    jmp     SHORT DetectPrint_DriveNameFromDrvDetectInfoInESBX
282
283
284%ifdef MODULE_8BIT_IDE_ADVANCED
285;--------------------------------------------------------------------
286; DetectDrives_DoesIdevarsInCSBPbelongToXTCF
287;   Parameters:
288;       CS:BP:  Ptr to IDEVARS for the drive
289;   Returns:
290;       ZF:     Set if IDEVARS belongs to XT-CF device
291;               Cleared if some other device
292;   Corrupts registers:
293;       AL
294;--------------------------------------------------------------------
295DetectDrives_DoesIdevarsInCSBPbelongToXTCF:
296    mov     al, [cs:bp+IDEVARS.bDevice]
297    cmp     al, DEVICE_8BIT_XTCF_PIO8
298    je      SHORT .DeviceIsXTCF
299    cmp     al, DEVICE_8BIT_XTCF_DMA
300    je      SHORT .DeviceIsXTCF
301    cmp     al, DEVICE_8BIT_XTCF_MEMMAP
302.DeviceIsXTCF:
303NoSlaveDriveAvailable:
304    ret
305%endif ; MODULE_8BIT_IDE_ADVANCED
Note: See TracBrowser for help on using the repository browser.