source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH24h_HSetBlocks.asm @ 365

Last change on this file since 365 was 365, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Errors from AH=9h are stored to DPTs again.
  • XT build fits in 8k again.
File size: 1.8 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Int 13h function AH=24h, Set Multiple Blocks.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Int 13h function AH=24h, Set Multiple Blocks.
9;
10; AH24h_HandlerForSetMultipleBlocks
11;   Parameters:
12;       AL:     Same as in INTPACK
13;       DL:     Translated Drive number
14;       DS:DI:  Ptr to DPT (in RAMVARS segment)
15;       SS:BP:  Ptr to IDEPACK
16;   Parameters on INTPACK:
17;       AL:     Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128)
18;   Returns with INTPACK:
19;       AH:     Int 13h return status
20;       CF:     0 if successful, 1 if error
21;--------------------------------------------------------------------
22AH24h_HandlerForSetMultipleBlocks:
23%ifndef USE_186
24    call    AH24h_SetBlockSize
25    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
26%else
27    push    Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
28    ; Fall to AH24h_SetBlockSize
29%endif
30
31
32;--------------------------------------------------------------------
33; AH24h_SetBlockSize
34;   Parameters:
35;       AL:     Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128)
36;       DS:DI:  Ptr to DPT (in RAMVARS segment)
37;       SS:BP:  Ptr to IDEPACK
38;   Returns:
39;       AH:     Int 13h return status
40;       CF:     0 if successful, 1 if error
41;   Corrupts registers:
42;       AL, CX, DX
43;--------------------------------------------------------------------
44AH24h_SetBlockSize:
45    push    bx
46
47    push    ax
48    xchg    dx, ax      ; DL = Block size (Sector Count Register)
49    mov     al, COMMAND_SET_MULTIPLE_MODE
50    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRDY, FLG_STATUS_DRDY)
51    call    Idepack_StoreNonExtParametersAndIssueCommandFromAL
52    pop     bx
53    jnc     SHORT .StoreBlockSize
54    mov     bl, 1       ; Block size 1 will always work
55.StoreBlockSize:        ; Store new block size to DPT and return
56    mov     [di+DPT_ATA.bBlockSize], bl
57
58    pop     bx
59    ret
Note: See TracBrowser for help on using the repository browser.