source: xtideuniversalbios/trunk/Assembly_Library/Src/Display/CgaSnow.asm @ 592

Last change on this file since 592 was 592, checked in by krille_n_, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 4.3 KB
RevLine 
[48]1; Project name  :   Assembly Library
2; Description   :   Functions for preventing CGA snow.
3
[376]4;
[491]5; XTIDE Universal BIOS and Associated Tools
[526]6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[376]7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
[491]12;
[376]13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
[491]16; GNU General Public License for more details.
[376]17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
[491]18;
[376]19
[48]20; Section containing code
21SECTION .text
22
[50]23;--------------------------------------------------------------------
24; CgaSnow_IsCgaPresent
25;   Parameters:
26;       DS:     BDA segment (zero)
27;   Returns:
28;       CF:     Set if CGA detected
29;               Cleared if CGA not detected
30;   Corrupts registers:
[583]31;       Nothing
[50]32;--------------------------------------------------------------------
[369]33ALIGN DISPLAY_JUMP_ALIGN
[50]34CgaSnow_IsCgaPresent:
35    cmp     WORD [BDA.wVidPort], CGA_STATUS_REGISTER - OFFSET_TO_CGA_STATUS_REGISTER
36    jne     SHORT .CgaNotFound
[52]37
38    ; All standard CGA modes use 25 rows but only EGA and later store it to BDA.
[583]39    cmp     BYTE [BDA.bVidRows], 25     ; *FIXME* Shouldn't this be 24 (rows - 1)?
40    jae     SHORT .CgaNotFound
[50]41    ret
[369]42ALIGN DISPLAY_JUMP_ALIGN
[50]43.CgaNotFound:
44    clc
45    ret
[48]46
[50]47
[162]48; CGA snow prevention must be kept optional to avoid unnecessary
49; overhead when building programs meant for non-CGA systems.
[48]50%ifdef ELIMINATE_CGA_SNOW
51
52;--------------------------------------------------------------------
[49]53; CgaSnow_Stosb
54; CgaSnow_Stosw
[48]55;   Parameters:
56;       AL:     Character to output
57;       AH:     Attribute to output (CgaSnow_StoswWithoutCgaSnow only)
58;       DS:     BDA segment (zero)
59;       ES:DI:  Ptr to video memory where to output
60;   Returns:
61;       DI:     Incremented for next character
62;   Corrupts registers:
63;       AX, DX
64;--------------------------------------------------------------------
[369]65ALIGN DISPLAY_JUMP_ALIGN
[49]66CgaSnow_Stosb:
[50]67    call    LoadCgaStatusRegisterAddressToDXifCgaPresent
68    jz      SHORT .StosbWithoutWaitSinceUnknownPort
[48]69
70    mov     ah, al
71    cli             ; Interrupt request would mess up timing
72    WAIT_UNTIL_SAFE_CGA_WRITE
73    mov     al, ah
74.StosbWithoutWaitSinceUnknownPort:
75    stosb
76    sti
77    ret
78
[369]79ALIGN DISPLAY_JUMP_ALIGN
[49]80CgaSnow_Stosw:
[48]81    push    bx
[50]82    call    LoadCgaStatusRegisterAddressToDXifCgaPresent
83    jz      SHORT .StoswWithoutWaitSinceUnknownPort
[48]84
85    xchg    bx, ax
86    cli             ; Interrupt request would mess up timing
87    WAIT_UNTIL_SAFE_CGA_WRITE
88    xchg    ax, bx
89.StoswWithoutWaitSinceUnknownPort:
90    stosw
[162]91    sti
[48]92    pop     bx
93    ret
94
[491]95
[48]96;--------------------------------------------------------------------
[49]97; CgaSnow_RepMovsb
[48]98;   Parameters:
99;       CX:     Number of characters to copy
100;       DS:     BDA segment (zero)
101;       ES:SI:  Ptr to video memory where to read from
102;       ES:DI:  Ptr to video memory where to write to
103;   Returns:
104;       SI, DI: Updated for next character
105;   Corrupts registers:
106;       AX, CX, DX
107;--------------------------------------------------------------------
[592]108%ifdef EXCLUDE_FROM_XUB
[491]109    %ifdef MODULE_STRINGS_COMPRESSED
110        %define EXCLUDE
111    %endif
112    %ifdef MODULE_BOOT_MENU
113        %undef EXCLUDE
114    %endif
115%endif
116
117%ifndef EXCLUDE
[369]118ALIGN DISPLAY_JUMP_ALIGN
[49]119CgaSnow_RepMovsb:
[50]120    call    LoadCgaStatusRegisterAddressToDXifCgaPresent
121    jz      SHORT .RepMovsbWithoutWaitSinceUnknownPort
[48]122
123.MovsbNextByte:
124    cli             ; Interrupt request would mess up timing
125    WAIT_UNTIL_SAFE_CGA_WRITE
[223]126    es movsb
[48]127    sti
128    loop    .MovsbNextByte
129    ret
130.RepMovsbWithoutWaitSinceUnknownPort:
131    eSEG_STR rep, es, movsb
132    ret
[489]133%endif
[491]134%undef EXCLUDE
[48]135
[491]136
[48]137;--------------------------------------------------------------------
[50]138; LoadCgaStatusRegisterAddressToDXifCgaPresent
[48]139;   Parameters:
140;       DS:     BDA segment (zero)
141;   Returns:
142;       DX:     CGA Status Register Address
[50]143;       ZF:     Set if CGA not present
144;               Cleared if CGA present
[48]145;   Corrupts registers:
146;       Nothing
147;--------------------------------------------------------------------
[369]148ALIGN DISPLAY_JUMP_ALIGN
[50]149LoadCgaStatusRegisterAddressToDXifCgaPresent:
150    test    BYTE [VIDEO_BDA.displayContext+DISPLAY_CONTEXT.bFlags], FLG_CONTEXT_CGA
151    jz      SHORT .NoCgaDetected
152    mov     dx, CGA_STATUS_REGISTER
[369]153ALIGN DISPLAY_JUMP_ALIGN, ret
[50]154.NoCgaDetected:
[48]155    ret
156
157
158%endif ; ELIMINATE_CGA_SNOW
Note: See TracBrowser for help on using the repository browser.